Casio EX-S2/EX-M2 manual Installing the USB Driver, To uninstall the USB driver

Page 87

USING THE CAMERA WITH A COMPUTER

■Installing the USB Driver

1.Turn off the camera and quit all applications on your Macintosh.

2.Insert the bundled CD-ROM provided into the CD-ROM drive.

3.Open the hard disk that is specified as the startup disk.

4.Open the “System Folder” on the startup disk.

5.Open the “Extensions” folder inside the “Sys- tem Folder.”

6.Open the “USB Driver” folder on the CD-ROM.

7.Drag “CASIO-USB Storage Driver” and “CASIO-USB Storage Class Shim” from the “USB Driver” folder to the “Extensions” folder.

8.Confirm that the “CASIO-USB Storage Driver” file and “CASIO-USB Storage Class Shim” file are in the “Extensions” folder, and then restart your Macintosh.

9.After the system starts up, use the USB cable to connect the camera to your Macintosh.

10.Turn on the camera.

11.From now on, the camera will be recognized as a drive whenever you con- nect the camera to your Macintosh.

•The shape of the icon that appears on your Macintosh display depends on the version of your Mac OS.

IMPORTANT!

•If you are running an operating system other than Mac OS 9 or Mac OS X, do not connect the camera to your Macintosh PC without installing the USB driver first.

●To uninstall the USB driver

Delete “CASIO-USB Storage Driver” and “CASIO-USB Storage Class Shim” from the “Extensions” folder.

87

Image 87

Contents EX-S2/EX-M2 Unpacking IntroductionContents Deleting Files Other Settings Transferring Files to a Computer Playing AN Audio File EX-M2 OnlyCopyright Restrictions Features General Precautions PrecautionsEX-M2 Only Introduction Operating conditions Data Error PrecautionsCondensation LED BacklightLens Other Getting Ready Quick Start GuideTo record an image To view a recorded image To delete an imageClick the controller to delete the selected image Front Getting ReadyCamera General GuideRemoving the Connector Cover USB CradleBottom Using the Controller Monitor Screen Contents Play Mode Attaching the Strap Indicator LampsPower Requirements To load the batteryTo charge the battery Turn off the camera and remove its connector coverSet the camera onto the USB cradle Getting Ready Battery Life Guidelines If the camera works normallyIf the camera does not work normally Low Battery Indicator Tip to Make the Battery Last LongerPower Supply Precautions Battery PrecautionsUSB Cradle and AC Adaptor Precautions Turning the Camera On and Off Auto Power Off APOUsing the On-screen Menus Press MenuMenu Screen Operations Next, do either of the following Configuring Display Language and Clock Settings Getting Ready Recording an Image Basic Image RecordingRecording Precautions About the REC Mode Monitor ScreenUsing Zoom Using the Flash About Red-eye Reduction Flash PrecautionsUsing the Self-timer Specifying Image Size and Quality To specify the image sizeTo specify the image quality Exposure Compensation EV Shift Other Recording FunctionsREC mode, press Menu Adjusting the White BalanceProce- dure under Adjusting the White Balance, select Manual Adjusting White Balance ManuallyClick the controller Using the Best Shot ModeUsing the Movie Mode Up or down to select Movie, and then Click Rock the controllerRecording Audio EX-M2 Only Adding Audio to a SnapshotPress the shutter release button to start audio recording Recording Your VoicePress the shutter release button to start voice recording Audio Recording PrecautionsREC Mode Camera Settings Turning the Monitor Screen On and OffTurning Image Review On and Off Assigning Functions to the Controller Specifying Power On Default Settings Basic Playback Operation PlaybackPlaying an Audio Snapshot EX-M2 Only Press Menu to return the image to its original size Zooming the Displayed ImageResizing an Image Playing a Movie Play modeAdding Audio to a Snapshot EX-M2 Only To re-record audio Playing Back a Voice Recording File EX-M2 Only Press Menu to exit the menu screen Deleting FilesDeleting a Single File Click the controller to delete the fileClick the controller to delete all the files Deleting All FilesFile Management Memory Folders and FilesFolders Protecting Files To protect a single fileTo protect all files in memory Dpof Settings File NameTo insert the date during printing To configure print settings for a single imageClick the controller to complete the procedure To configure print settings for all imagesExif Print Print Image MatchingTo copy a file to the Favorite folder Using the Favorite FolderTo delete a file from the Favorite folder To display a file in the Favorite folderOther Settings Turning the Key Tone On and OffSpecifying an Image for the Startup Screen Click to register the settings and exit the set- ting screen Changing the Date and Time SettingChanging the Display Language Changing the Date FormatPage Using a Memory Card Using a Memory Card To insert a memory card into the cameraTo remove a memory card from the camera Formatting a Memory Card Memory Card Precautions To copy all the files in built-in memory to a memory cardCopying Files To copy a file from a memory card to built-in memory Photo Loader for Windows/Macintosh Using the Camera with a ComputerInstalling the Software from the CD-ROM About the bundled CD-ROMComputer System Requirements WindowsMacintosh Installing Software from the CD-ROM in Windows Getting StartedSelecting a Language Installing an Application Viewing the Contents of the Read me FileOn the menu screen, click Exit to exit the menu Installing SoftwareInstalling Software from the CD-ROM on a Macintosh Exiting the Menu ApplicationTo install Internet Explorer and Outlook Express To install Photo LoaderTo install Acrobat Reader To uninstall the USB driver Installing the USB DriverTo read the Photo Loader user’s guide To view the camera user’s guideTransferring Files to a Computer Transferring Files Over a USB Connec- tionTo connect the USB Cable Turn off the camera and remove its connector cover Terminating a USB Connection Using a Memory Card to Transfer Images to a ComputerUsing a Commercially Available SD Memory Card Reader/Writer Memory DataDCF Protocol Folder and File Contents Memory Directory StructureDirectory Structure Image Files Supported by the Camera Built-in Memory and Memory Card PrecautionsTransferring Audio Files to the Camera Playing AN Audio File EX-M2 OnlyAlign the mode selector with Audio Preparing the Camera for Audio Player OperationPlaying AN Audio File EX-M2 Only Using the Camera as an Audio Player LCD Remote ControllerGeneral Guide Playing AN Audio File EX-M2 Only Display 100 Basic Remote Controller OperationsAudio mode, start audio playback Specifying the Audio Playback ModeSelecting a Specify Track for Playback 101102 Specifying the Track Playback SequenceExample PLAYLIST.TXT File Contents 103Example Folder Structure 104 Disabling Remote Controller Button OperationsLCD Remote Control Error Messages Audio Playback Precautions105 Appendix 106Menu Reference Play tab menu Camera Indicator LampsIndicator Lamp Reference 107108 Audio Mode EX-M2 only109 USB Cradle Indicator Lamps110 Troubleshooting Guide111 112 113 Display MessagesCamera Functions Main SpecificationsSpecifications 114Exposure Control 115Power Supply 116Audio Player Function EX-M2 Only USB Cradle LCD Remote Controller Bundled with EX-M2 Only117 Other