Casio EX-S2/EX-M2 manual To insert a memory card into the camera, Using a Memory Card

Page 77

USING A MEMORY CARD

Using a Memory Card

To insert a memory card into the camera

1. Making sure that the contacts of the memory card are facing towards the top of the camera, carefully insert the card

into the slot as far as it	Contacts
into the slot as far as it
will go.

To remove a memory card from the camera

1.	Press the memory card
	into the camera and then
	release it. This will cause
	the card to come part way
	out of the camera.
2.	Pull the memory card out
	of the slot.

IMPORTANT!

•Never insert any other object besides a memory card into the camera’s card slot. Doing so creates the risk of damage to the camera and card.

•If you are not using a memory card, be sure to insert the dummy card into this slot to protect against dust and damage.

•The dummy card is intended for use with this camera only. Never insert it into the card slot of any other type of device.

•Should water or any foreign object ever get into the card slot, immediately turn off the camera, remove the battery, and contact your dealer or nearest CASIO authorized service center.

•Never remove a card from the camera while the op- eration/flash charge lamp is flashing. Doing so can cause the files save operation to fail, and even dam- age the memory card.

77

Image 77

Contents EX-S2/EX-M2 Unpacking IntroductionContents Deleting Files Other Settings Transferring Files to a Computer Playing AN Audio File EX-M2 OnlyCopyright Restrictions Features EX-M2 Only General PrecautionsPrecautions Introduction Operating conditions Data Error PrecautionsLens CondensationLED Backlight Other Getting Ready Quick Start GuideTo record an image Click the controller to delete the selected image To view a recorded imageTo delete an image Camera Getting ReadyGeneral Guide FrontBottom Removing the Connector CoverUSB Cradle Using the Controller Monitor Screen Contents Play Mode Attaching the Strap Indicator LampsPower Requirements To load the batterySet the camera onto the USB cradle To charge the batteryTurn off the camera and remove its connector cover Getting Ready If the camera does not work normally Battery Life GuidelinesIf the camera works normally Low Battery Indicator Tip to Make the Battery Last LongerUSB Cradle and AC Adaptor Precautions Power Supply PrecautionsBattery Precautions Turning the Camera On and Off Auto Power Off APOMenu Screen Operations Using the On-screen MenusPress Menu Next, do either of the following Configuring Display Language and Clock Settings Getting Ready Recording an Image Basic Image RecordingRecording Precautions About the REC Mode Monitor ScreenUsing Zoom Using the Flash About Red-eye Reduction Flash PrecautionsUsing the Self-timer Specifying Image Size and Quality To specify the image sizeTo specify the image quality Exposure Compensation EV Shift Other Recording FunctionsREC mode, press Menu Adjusting the White BalanceProce- dure under Adjusting the White Balance, select Manual Adjusting White Balance ManuallyClick the controller Using the Best Shot ModeUsing the Movie Mode Up or down to select Movie, and then Click Rock the controllerRecording Audio EX-M2 Only Adding Audio to a SnapshotPress the shutter release button to start audio recording Recording Your VoicePress the shutter release button to start voice recording Audio Recording PrecautionsTurning Image Review On and Off REC Mode Camera SettingsTurning the Monitor Screen On and Off Assigning Functions to the Controller Specifying Power On Default Settings Basic Playback Operation PlaybackPlaying an Audio Snapshot EX-M2 Only Press Menu to return the image to its original size Zooming the Displayed ImageResizing an Image Playing a Movie Play modeAdding Audio to a Snapshot EX-M2 Only To re-record audio Playing Back a Voice Recording File EX-M2 Only Deleting a Single File Deleting FilesClick the controller to delete the file Press Menu to exit the menu screenClick the controller to delete all the files Deleting All FilesFolders File ManagementMemory Folders and Files Protecting Files To protect a single fileTo protect all files in memory Dpof Settings File NameTo insert the date during printing To configure print settings for a single imageClick the controller to complete the procedure To configure print settings for all imagesExif Print Print Image MatchingTo copy a file to the Favorite folder Using the Favorite FolderTo delete a file from the Favorite folder To display a file in the Favorite folderSpecifying an Image for the Startup Screen Other SettingsTurning the Key Tone On and Off Click to register the settings and exit the set- ting screen Changing the Date and Time SettingChanging the Display Language Changing the Date FormatPage Using a Memory Card To remove a memory card from the camera Using a Memory CardTo insert a memory card into the camera Formatting a Memory Card Copying Files Memory Card PrecautionsTo copy all the files in built-in memory to a memory card To copy a file from a memory card to built-in memory Installing the Software from the CD-ROM Using the Camera with a ComputerAbout the bundled CD-ROM Photo Loader for Windows/MacintoshMacintosh Computer System RequirementsWindows Selecting a Language Installing Software from the CD-ROM in WindowsGetting Started Installing an Application Viewing the Contents of the Read me FileInstalling Software from the CD-ROM on a Macintosh Installing SoftwareExiting the Menu Application On the menu screen, click Exit to exit the menuTo install Acrobat Reader To install Internet Explorer and Outlook ExpressTo install Photo Loader To uninstall the USB driver Installing the USB DriverTo read the Photo Loader user’s guide To view the camera user’s guideTransferring Files to a Computer Transferring Files Over a USB Connec- tionTo connect the USB Cable Turn off the camera and remove its connector cover Terminating a USB Connection Using a Memory Card to Transfer Images to a ComputerDCF Protocol Using a Commercially Available SD Memory Card Reader/WriterMemory Data Directory Structure Folder and File ContentsMemory Directory Structure Image Files Supported by the Camera Built-in Memory and Memory Card PrecautionsTransferring Audio Files to the Camera Playing AN Audio File EX-M2 OnlyPlaying AN Audio File EX-M2 Only Align the mode selector with AudioPreparing the Camera for Audio Player Operation General Guide Using the Camera as an Audio PlayerLCD Remote Controller Playing AN Audio File EX-M2 Only Display 100 Basic Remote Controller OperationsSelecting a Specify Track for Playback Specifying the Audio Playback Mode101 Audio mode, start audio playback102 Specifying the Track Playback SequenceExample Folder Structure Example PLAYLIST.TXT File Contents103 104 Disabling Remote Controller Button Operations105 LCD Remote Control Error MessagesAudio Playback Precautions Menu Reference Appendix106 Indicator Lamp Reference Camera Indicator Lamps107 Play tab menu108 Audio Mode EX-M2 only109 USB Cradle Indicator Lamps110 Troubleshooting Guide111 112 113 Display MessagesSpecifications Main Specifications114 Camera FunctionsExposure Control 115Audio Player Function EX-M2 Only Power Supply116 117 LCD Remote Controller Bundled with EX-M2 OnlyOther USB Cradle