Casio EX-S2/EX-M2 manual Turn off the camera and remove its connector cover

Page 91

USING THE CAMERA WITH A COMPUTER

5.Turn off the camera and remove its connector cover.

Connector cover

6. Making sure that the camera is turned off, set it onto the USB cradle.

• Do not place the camera onto the USB cradle while it is turned on.

7.Turn on the camera.

•When you turn on the camera, it enters the USB Mode and automatically transfers the files in camera memory to the computer.

•While the camera is in the USB Mode, the USB lamp on the cradle lights green (page 109).

IMPORTANT!

•Be sure to read the applicable information in the user documentation that comes with your computer before connecting the USB cradle.

•Do not leave the same image displayed on your com- puter screen for a long time. Doing so can cause the image to “burn in” on the screen.

•Take care when connecting the USB cable to the USB cradle. The USB port and the cable plug are shaped for proper positioning.

•Plug the USB cable into the ports securely as far as it will go. Proper operation is not possible if connections are not correct.

•Be sure to connect the AC adaptor to the USB cradle to supply power to the camera.

•The optionally available CASIO QC-1U USB cable cannot be used with this camera.

•Never disconnect the USB cable while the PC is ac- cessing camera memory (indicated by a flashing USB lamp). Doing so can cause data to become corrupted.

•You can perform data communication in either the REC mode or PLAY mode.

91

Image 91

Contents EX-S2/EX-M2 Unpacking IntroductionContents Deleting Files Other Settings Transferring Files to a Computer Playing AN Audio File EX-M2 OnlyCopyright Restrictions Features Precautions General PrecautionsEX-M2 Only Introduction Operating conditions Data Error PrecautionsLED Backlight CondensationLens Other Getting Ready Quick Start GuideTo record an image To delete an image To view a recorded imageClick the controller to delete the selected image Front Getting ReadyCamera General GuideUSB Cradle Removing the Connector CoverBottom Using the Controller Monitor Screen Contents Play Mode Attaching the Strap Indicator LampsPower Requirements To load the batteryTurn off the camera and remove its connector cover To charge the batterySet the camera onto the USB cradle Getting Ready If the camera works normally Battery Life GuidelinesIf the camera does not work normally Low Battery Indicator Tip to Make the Battery Last LongerBattery Precautions Power Supply PrecautionsUSB Cradle and AC Adaptor Precautions Turning the Camera On and Off Auto Power Off APOPress Menu Using the On-screen MenusMenu Screen Operations Next, do either of the following Configuring Display Language and Clock Settings Getting Ready Recording an Image Basic Image RecordingRecording Precautions About the REC Mode Monitor ScreenUsing Zoom Using the Flash About Red-eye Reduction Flash PrecautionsUsing the Self-timer Specifying Image Size and Quality To specify the image sizeTo specify the image quality Exposure Compensation EV Shift Other Recording FunctionsREC mode, press Menu Adjusting the White BalanceProce- dure under Adjusting the White Balance, select Manual Adjusting White Balance ManuallyClick the controller Using the Best Shot ModeUsing the Movie Mode Up or down to select Movie, and then Click Rock the controllerRecording Audio EX-M2 Only Adding Audio to a SnapshotPress the shutter release button to start audio recording Recording Your VoicePress the shutter release button to start voice recording Audio Recording PrecautionsTurning the Monitor Screen On and Off REC Mode Camera SettingsTurning Image Review On and Off Assigning Functions to the Controller Specifying Power On Default Settings Basic Playback Operation PlaybackPlaying an Audio Snapshot EX-M2 Only Press Menu to return the image to its original size Zooming the Displayed ImageResizing an Image Playing a Movie Play modeAdding Audio to a Snapshot EX-M2 Only To re-record audio Playing Back a Voice Recording File EX-M2 Only Press Menu to exit the menu screen Deleting FilesDeleting a Single File Click the controller to delete the fileClick the controller to delete all the files Deleting All FilesMemory Folders and Files File ManagementFolders Protecting Files To protect a single fileTo protect all files in memory Dpof Settings File NameTo insert the date during printing To configure print settings for a single imageClick the controller to complete the procedure To configure print settings for all imagesExif Print Print Image MatchingTo copy a file to the Favorite folder Using the Favorite FolderTo delete a file from the Favorite folder To display a file in the Favorite folderTurning the Key Tone On and Off Other SettingsSpecifying an Image for the Startup Screen Click to register the settings and exit the set- ting screen Changing the Date and Time SettingChanging the Display Language Changing the Date FormatPage Using a Memory Card To insert a memory card into the camera Using a Memory CardTo remove a memory card from the camera Formatting a Memory Card To copy all the files in built-in memory to a memory card Memory Card PrecautionsCopying Files To copy a file from a memory card to built-in memory Photo Loader for Windows/Macintosh Using the Camera with a ComputerInstalling the Software from the CD-ROM About the bundled CD-ROMWindows Computer System RequirementsMacintosh Getting Started Installing Software from the CD-ROM in WindowsSelecting a Language Installing an Application Viewing the Contents of the Read me FileOn the menu screen, click Exit to exit the menu Installing SoftwareInstalling Software from the CD-ROM on a Macintosh Exiting the Menu ApplicationTo install Photo Loader To install Internet Explorer and Outlook ExpressTo install Acrobat Reader To uninstall the USB driver Installing the USB DriverTo read the Photo Loader user’s guide To view the camera user’s guideTransferring Files to a Computer Transferring Files Over a USB Connec- tionTo connect the USB Cable Turn off the camera and remove its connector cover Terminating a USB Connection Using a Memory Card to Transfer Images to a ComputerMemory Data Using a Commercially Available SD Memory Card Reader/WriterDCF Protocol Memory Directory Structure Folder and File ContentsDirectory Structure Image Files Supported by the Camera Built-in Memory and Memory Card PrecautionsTransferring Audio Files to the Camera Playing AN Audio File EX-M2 OnlyPreparing the Camera for Audio Player Operation Align the mode selector with AudioPlaying AN Audio File EX-M2 Only LCD Remote Controller Using the Camera as an Audio PlayerGeneral Guide Playing AN Audio File EX-M2 Only Display 100 Basic Remote Controller OperationsAudio mode, start audio playback Specifying the Audio Playback ModeSelecting a Specify Track for Playback 101102 Specifying the Track Playback Sequence103 Example PLAYLIST.TXT File ContentsExample Folder Structure 104 Disabling Remote Controller Button OperationsAudio Playback Precautions LCD Remote Control Error Messages105 106 AppendixMenu Reference Play tab menu Camera Indicator LampsIndicator Lamp Reference 107108 Audio Mode EX-M2 only109 USB Cradle Indicator Lamps110 Troubleshooting Guide111 112 113 Display MessagesCamera Functions Main SpecificationsSpecifications 114Exposure Control 115116 Power SupplyAudio Player Function EX-M2 Only USB Cradle LCD Remote Controller Bundled with EX-M2 Only117 Other