Concord Camera 2040 manual Installing the Driver and Directx 9 Windows 98 SE, Step Click Next

INSTALLATION GUIDE

INSTALLING THE DRIVER AND DIRECTX 9 – WINDOWS 98 SE

NOTE:

•Do not connect the camera to your computer before the camera drivers and Microsoft DirectX 9.0 installation is completed.

•The installation Windows messages displayed on the computer screen may vary due to the different operating systems, but the installation procedures should be the same to each another.

En

Step 1	Make sure your camera is powered off and not connected to the computer.
Step 2	Make sure the computer is powered on and Windows is running.
Step 3	Close any other applications or software you may be running.
Step 4	Insert the CD-ROM included in your camera’s packaging into your computer’s
	CD-ROM Drive.
	NOTE: If the installer does not start automatically within 30 seconds after the
	CD-ROM has been inserted, click on "My Computer" either on the Desktop
	or in the Start Menu and locate the CD-ROM Drive. Double click on the CD-
	ROM Drive icon for installation.
Step 5	Select the language. Click [OK].

Step 6	The installation screen will appear.
	Click on Install Camera Drivers.

Step 7 Click [Next >].

Step 8	The next dialog will prompt you to select the
	components that will be installed. The files will be
	saved in the Concord Eye-Q 2040 directory
	automatically. OR
	You may change the default folder by clicking
	[Browse…] and selecting a different folder in your
	computer.
	Click [Next>].
	32