GETTING STARTED
LOADING THE BATTERIES
fig.1.1 |
fig.1.2 |
En
fig.1.3
The camera uses 2x AA batteries.
1.Slide the Battery/Memory Card Door towards the center of the camera, and lift the Battery/Memory Card Door to open.
2.Insert the batteries with the positive terminal toward the ( + ) sign, and the negative terminal toward the ( – ) sign.
3.Close the battery/memory card door.
CHECKING THE BATTERY LEVEL
The battery level is displayed on the LCD.
(Green, Full)
The battery is full and ready to use.
(Red, Low)
The battery is low
and it needs to
be replaced soon
Note:
•Remove the battery from the camera if it will not be used for an extended period of time to prevent corrosion or battery leaks.
•To extend battery life, the camera will automatically power off after 60 seconds of inactivity. To change this setting, please refer to page 25.
6