Concord Camera 2040 manual Internal Memory, Status Memory in Use, How to Insert Memory Card

En

GETTING STARTED

INTERNAL MEMORY

The camera is equipped with 7MB of internal memory to store pictures and video clips in the camera.

Status	Memory in Use
Memory card is not inserted	Internal Memory
Memory card is inserted	Memory Card

How to Insert Memory Card

fig.1.1

fig.1.2

fig.1.3

In addition to having a 7MB internal memory, the camera can use MultiMediaCard (MMC) or Secure Digital (SD) memory cards to store images and video clips. Memory cards are sold separately and can be purchased from major electronic or computer retailers.

1.Slide the Battery/Memory Card Door towards the center of the camera and lift the Battery/Memory Card Door to open. (fig.1.1)

2.Insert the memory card into memory card slot with its metal contacts exposed side down and its printed side facing outward. (fig.1.2)

3.Close the battery/memory card door. (fig.1.3)

NOTE!: When memory card is inserted, the images and video	1600
clips stored in the internal memory will be transferred	A
automatically onto the memory card. Please insert a memory card
with 8MB or greater memory, or delete images. The camera can
support SD cards up to 512 MB. If the camera is turned on, the	AWB
LCD shows “transferring …” while transferring the pictures. After	005/042
that, the memory card indicator is shown on LCD, and the frame	fig.1.4
counter number will be updated automatically. (fig.1.4) However, if the memory card

inserted is not recognizable, the card indicator will not be shown on LCD. In this case, please re-insert the memory card correctly or to replace it with another one.

How to Take Out the Memory Card:

1.Slide the Battery/Memory Card Door towards the center of the camera and lift the Battery/Memory Card Door to open.

2.Take the memory card out by finger tips. (fig.1.5)

3.Close the battery/memory card door.

fig.1.5

7