Concord Camera 2040 manual Using Arcsoft Photoimpression, Unplugging Your Camera from the Computer

CONNECTING THE CAMERA TO THE COMPUTER

USING ARCSOFT PHOTOIMPRESSION

1.Connect the camera to the computer.

2.Launch ArcSoft PhotoImpression software by clicking on Start- Programs-ArcSoft Camera Suite and choosing PhotoImpression from the application list on your screen.

3.When the Application opens, click on the [Camera/Scanner] button. (a)

4.Click on the drop-down list under Select Source and choose Concord Camera. (b)

5.Click on the Camera/ Scanner Icon. (c)

•A second window will appear showing the contents (pictures) in

the memory card, and options on how to handle them. (d)

6.Select the picture you would like to view, edit or save by clicking on it. The selected image will be highlighted by a border. You may also click on Select All (f) to choose all pictures.

7.Click on Get Photos (e).

8.The pictures will then be added to your album at the bottom of the application (g). To access these, click CLOSE on the Camera Controls windows. Double click on the thumbnail to open.

9.You may now edit, save, print or further enhance your pictures using the buttons on the left hand side of the screen. Please refer to ArcSoft's Software help section for a tutorial on all the features PhotoImpression offers.

En

UNPLUGGING YOUR CAMERA FROM THE COMPUTER

Windows98SE:

1.Double-click on My Computer

2.Right-click on Removable Disk to display the menu.

3.Click on Eject in the menu.

4.Unplug the Mini-USB from the camera.

Windows ME/2000/XP:

1.Turn the camera off.

2.Click once on the "Unplug or Eject Hardware" icon on the right hand side of your task bar. (fig.1.1)

3.Select “Stop Concord Eye-Q 2040 USB Mass Storage Device”

4.Click [OK] in the “Safe to Remove Hardware” prompt.

5.Unplug the Mini-USB from the camera. (fig.1.2)

fig.1.1

fig.1.2

40