Concord Camera 5062AF, 4062AF manual Setting the Flash, Using AF Assist Light, How to set the flash

TAKING A PICTURE

SETTING THE FLASH

A	3M	28/45	3M	28/45
AWB			AWB

En

fig. 1.1 fig. 1.2 fig. 1.3

How to set the flash:

Press / repeatedly until the desired indicator appears on the LCD.

Flash Mode		Description
A Auto Flash (Default)		The camera judges if a flash is required. If the environment is too dark,
		the flash will fire.
A	Auto + Red-Eye	Use this mode to significantly reduce the occurrence of “red-eye” in flash
		photography. The camera will automatically detect when the flash is needed
		and the flash will fire after a short delay.
	Flash ON	Flash will fire in any lighting condition. The “red-eye” reduction function is
		also included.
	Flash off	The flash will not fire in this mode. Please use this mode if you want to
		capture the mood of the ambient lighting or to use the available light in
		places where flash photography is prohibited, such as museums.
		• To prevent blurry pictures in low light situations, hold the camera steady
		when pressing the Shutter button or mount the camera on a tripod.

Note:

•The flash needs to recharge after it is fired. If the Shutter button is pressed while the flash is charging, the Flash Ready LED will blink. Please wait a few moments and press the Shutter button again to take a picture.

•Changing the Scene Selection may deactivate the flash setting. Please refer to p.20 for more information.

USING AF ASSIST LIGHT

The AF Assist Light will help to set the focus in low light conditions.

1.Half press the Shutter button and the AF Assist Light will automatically be on when there is insufficient light.

2.Fully press the Shutter button to take a picture. (For the details of taking pictures, see page 9.)

12