CUSTOMIZING THE CAMERA SETTINGS
TURNING THE BEEP SOUND ON OR OFF
The camera provides an option to enable or disable the beep sound. The beep sound is ON by default. While the beep sound is on, the camera will beep in any of the following situations:
•When the camera is powered on.
•After an image is captured. (Note: The beep after image capture cannot be disabled.)
•When any button, except for the Power button and the Camera Mode slide switch button, is pressed.
En
How to activate/deactivate the beep sound:
SETUP
FORMAT
DATE/TIME SETUP
BEEP
QUICK VIEW
AF ASSIST LIGHT
RETURN 
SELECT
BEEP
ON
OFF
RETURN 
OK SET
1.In the Setup menu, press
or 
until Beep is highlighted.
2.Press 
to enter its submenu.
3.Press 
or 
to highlight the desired selection.
4.Press the OK button to set.
SETTING QUICK VIEW INTERVAL
The camera provides programmable Quick View duration, which is the time that the image is shown to the user immediately after a picture is taken.
Quick View | Description |
Off | No quick view, remain in live viewfinder. |
1 sec (Default) | Display image for 1 seconds then return to live viewfinder. |
3 sec | Display image for 3 seconds then return to live viewfinder. |
5 sec | Display image for 5 seconds then return to live viewfinder. |
How to select Quick View time phrase:
SETUP
FORMAT
DATE/TIME SETUP
BEEP
QUICK VIEW
AF ASSIST LIGHT
RETURN 
SELECT
QUICK VIEW
Off
11 Sec
33 Sec
55 Sec
RETURN 
OK SET
1.In the Setup menu, press 
or 
until Quick View is highlighted.
2.Press 
to enter its submenu.
3.Press 
or 
to highlight the desired selection.
4.Press the OK button to set.
42