JVC LVT1055-001A Changing the display color, Setting the desired color for each source, All SRC*1

Changing the display color

You can set the display color using the PSM control. You can select your favorite color for each source (or for all sources).

You can also create your own colors, and set them as the display color.

Setting the desired color for each source

Once you have set the color for each source (or for all sources), the display illuminates in the selected color when the source is selected.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: See pages 51.)

SEL

2 Press number button 6 to select “COLOR”—Color category of the PSM settings.

1 2 3 4 5 6

The “All SRC” setting screen appears on the display.

3 Select the source—All SRC, CD, Changer (Line), FM, or AM—that you want to set the display color for.

*1 When you select “All SRC,” the same color will be used for all sources.

*2 Either component which is selected in the “Ext Input” setting appears.

4 Select the display color.

As you turn the control

dial, the colors change

as follows:

ATT

Every*1 O Aqua O Sky O Sea O Leaves O Grass O Red O Rose O Amber OHoney O Violet O Cotton O Snow O User*2 O (back to the beginning)

*1 When you select “Every,” the color changes every 2 seconds (changing to every color listed above except “User”).

*2 When you select “User,” the user-edited colors—“Day” and “Night” will be applied. (See page 56.)

5 Repeat steps 3 and 4 to select the color for each source (except when selecting “All SRC” in step 3).

•If you want to apply different colors to the different sources, select any source other than “All SRC” before finish the setting.

6 Finish the setting.

SEL

ENGLISH

All SRC*1		CD
AM	FM	Changer*2
		(Line)

55