Output signals through the Digital OUT terminal | JVC LVT1055-001A

	Symptoms			Causes		Remedies

•	“No Disc” flashes on the		No disc is in the magazine.			Insert discs into the magazine.
•	“No Disc” flashes on the		No disc is in the magazine.			Insert discs into the magazine.
	display.
	display.		Discs are inserted upside down.			Insert discs correctly.
			Discs are inserted upside down.			Insert discs correctly.

			Discs are unplayable.			Insert playable discs.

			The current disc does not			Insert a disc that contains
			contain any MP3 files.			MP3 files.

•	“No Magazine” flashes on		No magazine is loaded in the			Insert the magazine.
	the display.		CD changer.						Changer

•	“Reset 8” flashes on the		This unit is not connected to the			Connect this unit and the
	display.		CD changer correctly.			CD changer correctly and
						press the reset button on the			CD
						CD changer.			CD

•	“Reset 1” – “Reset 7”					Press the reset button on the
	flashes on the display.					CD changer.

•	The CD changer does not		The built-in microcomputer may			Press the reset button on the
	work at all.		function incorrectly due to			panel holder after detaching
			noise, etc.			the control panel. (The clock
						setting and preset stations
						stored in memory are
						erased.) (See page 2.)

ENGLISH

Output signals through the DIGITAL OUT terminal

They differ depending on the “DIGITAL AUDIO OUT” setting on the Setup Menu.

DIGITAL AUDIO OUT		Output Signals
Playback Disc	PCM ONLY	DOLBY DIGITAL/PCM	STREAM/PCM
DVD 48 kHz, 16/20/24 bit Linear PCM		48 kHz, 16 bit Linear PCM *
96 kHz, Linear PCM		None
with Dolby Digital	48 kHz, 16 bit Linear PCM	Dolby Digital bitstream
with DTS	48 kHz, 16 bit Linear PCM		DTS bitstream
with MPEG Multichannel	48 kHz, 16 bit Linear PCM		MPEG bitstream
Video CD, Audio CD		44.1 kHz, 16 bit Linear PCM
Audio CD with DTS	44.1 kHz, 16 bit Linear PCM		DTS bitstream
MP3		Linear PCM

*While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the discs are not copy-protected.

71

Image 71

JVC LVT1055-001A Output signals through the Digital OUT terminal, Digital Audio OUT, Output Signals Playback Disc, MP3

Contents

§·π-π Position And Reproduction Of Labels How to reset your unit Before USE For safety Contents Control panel How to use the Mode M buttonLocation of the Buttons ¢ reverse search/forward search Disc basic operation buttonsStop, 8 pause, 3 play Disc advanced operation buttons Return the battery holder Installing the batteryRemove the battery holder Place the battery Basic Operations Turning on the powerTo drop the volume in a moment To turn off the power Select Off Setting the clockAdjust the hour Finish the setting Off Activating the level meterMeter Searching for a station automatically Auto search Listening to the radio Display returns to the source indication When an FM stereo broadcast is hard to receiveSearching for a station manually Manual search Storing stations in memory FM station automatic preset SSMManual preset Start automatic preset 92.5 MHz Tuning in to a preset stationSelecting a preset station directly Tune in to a station in this example Display patterns change as follows Selecting a preset station using the preset station list ALL Playable DiscsDisc structure Discs you can play About Dual Zone MP3 discsAbout sounds reproduced through the rear terminals Through Digital OUT optical Insert a disc into the loading slot Basic Disc PlaybackStarting playback Open the control panel MP3 disc Display indications when inserting a VCD or CD To eject a disc Locating a particular title/ chapter/trackTo stop playback temporarily To stop playback On-screen guide icons From the remote controllerLocating a particular folder To locate a particular title/chapter/track directly Select a desired subtitle language DVD/VCD Special FunctionsSelecting subtitles Select a desired view angle Selecting audio languagesSelecting multi-angle views Select a desired audio language or audio channel While playing a VCD To cancel the title list or menuTo cancel the PBC playback Menu operations Move the zoomed-in portion on the monitor ZoomZoom in to the picture Time Search Advanced Disc OperationsSearching for a particular Point Time 23 Chapter SearchTime 2 Time 0 Track Folder OFF Select the repeat mode you wantRepeat Play Track OFF Disc OFF Random PlayIntro Scan Dual Listening with headphonesDual indicator appears Source automatically changes to Disc Dual Zone Operations On the control panel Adjust the headphone volume through the 2nd Audio OUT plugTo adjust the headphone level, use the remote controller To cancel Dual Zone operations, repeat steps Press OSD once Basic procedure for DVD, VCD and CDOSD Disc Operations Operations on the monitor screen For VCD and CD What you can do on the on-screen barsMove to an item on the menu bar, then press Enter Select an option or enter a chapter number MP3 Control screen Basic procedure for MP3 discsOperations from the remote controller To start playback again When you insert a discOther Disc Operations Basic disc playback To go to a chapter/track quickly On a disc Select the number 1 6 for the folder Selecting a folder/track to play using the listsTo select a folder and start playback To skip to the next or previous folder To select a track and start playback You can play back tracks on a disc or in a folder at random To cancel Repeat Play, select Repeat Off byPress Mode M to enter Track Chapter Title Off Track Disc Off If the information cannot be shown at a time, it To cancel the prohibition and unlock the discProhibiting disc ejection While pressing SRC, press and hold for more than 2 seconds Shown, Audio DVD Setup MenuBasic setting procedure To return to the normal screen ScreenTo set other items on other menu screens On Screen Language Menu LanguageAudio Language Subtitle STREAM/PCM AudioPCM only Dolby DIGITAL/PCM Adjusting the sound Sound Adjustments Press EQ equalizer once Press the number button to select the sound mode you want Select the sound mode you want to adjust Storing your own sound adjustmentsPress EQ equalizer once Make adjustments as you like Store the adjustment you made Other Main Functions Changing the general settings PSMBasic Procedure Select the PSM item you want to adjust Color Preferred Setting Mode PSM itemsClock NTSC/PAL To select the display illumination pattern LCD Type To adjust the display contrast level ContrastTo select the source animation on the display-KeyIn CFM To select the scroll mode-Scroll To turn on/off the key-touch tone-Beep To select a proper video systemExt Input To select the telephone muting- Telephone Selecting the dimmer mode All SRC*1 Setting the desired color for each sourceChanging the display color Select the display color Screen Select the user color adjustmentPress 5 up or ∞ down to adjust the selected primary color Creating your own color-User Sources Maximum number Characters Capital a z small Numbers, and symbols Select a characterTo erase entered characters Move the cursor to the next Or previous character position Attaching the control panel Detaching the control panel Select the CD changer CD-CH When the current disc is an MP3 discCD Changer Operations Playing discs To go to a particular disc directly To change the display informationTo fast-forward or reverse the track To go to the next or previous tracks Ex To select track number 32 while Playing track number How to go to the desired track quicklyTo go to a track quickly To skip to the next or previous folder only for MP3 discs Display can show only six disc names at a time To select a disc using the disc listsDisc list Folder list Track list Repeat Track Repeat Disc Repeat Off To play back tracks repeatedly Repeat PlayTo play back tracks at random Random Play Repeat Track Repeat Folder Repeat Off Repeat Disc Intro Track Intro Folder Intro Off To play back only intros Intro ScanRandom Folder Random Disc Random Off Random All Random Disc Random All Random Off Before operating the external component Adjust the sound characteristics you want. See pages 47External Component Operations Select the external component Line Available characters Sound modes preset frequency level settingsSound Preset equalizing values Mode Additional Information Code Language Language Codes Glossary FM/AM TroubleshootingSymptoms Causes Remedies Picture are Disc PlaybackSelect 43 LB. See PCM only Dolby DIGITAL/PCM STREAM/PCM Output signals through the Digital OUT terminalOutput Signals Playback Disc Digital Audio OUT Handling discs Maintenance AM Tuner SpecificationsFM Tuner ¡’ª≠À„π√„Èßπ Sound is distorted === Power cannot be turned onFuse blows No sound from the speakers Lock Plate Control panel Trim plateHandle Dashboard Rubber cushion Fire wall Install the unit at an angle of less than 30˚ 30˚ =Washer Dashboard Digital OUT==EF W =LLINE OUTAudio OUT =DIGITAL OUT 212V 250 mA 200 mA See diagram BSee diagram B = B To an accessory terminal in the fuse block Fuse block JVC JVC = KS-HP1KJVC JVC=