JVC LVT1055-001A manual To select the source animation on the display-KeyIn CFM

ENGLISH

To set the movie demonstration—Graphics

When shipped from the factory, the movie has been activated.

•All Demo: If no operation is done for about

20 seconds, the movie demonstration starts automatically.

•Int Demo: If no operation is done for about

	20 seconds, the movie demonstration
	and playback source indication
	appears alternately on the display.
• Off:	Cancels the movie demonstration.

To select the source animation on the display—KeyIn CFM

When changing the source, the display shows the source animation. You can select the source animation on the display according to your preference.

•	Long:	A long source animation appears.
•	Short:	A short source animation appears.
•	Off:	Cancels the source animation.

To select the scroll mode—Scroll

You can select the scroll mode for the disc information (when the entire text cannot be shown at once).

•	Once:	Scrolls only once.
•	Auto:	Repeats the scroll (in 5-second
		intervals).
•	Off:	Cancels scroll mode.

Note:

Even if the scroll mode is set to “Off,” you can scroll the display by pressing DISP (D) for more than one second.

To adjust the display contrast level

—Contrast

You can adjust the display contrast level among 1 to 10.

Adjust it to make the display indications clear

and legible.

To select the display illumination pattern

—LCD Type

You can select the display illumination patterns according to your preference.

• Auto:	Positive pattern will be selected
	during the day time (depending on
	the “Dimmer” setting); on the other
	hand, negative pattern will be used
	during the night time (depending on
	the “Dimmer” setting).

•Positive: Positive (normal) pattern of the display.

•Negative: Negative pattern of the display.

To select the font on the display

—Font Type

You can change the font types used on the display. Select either “1” or “2” according to your

preference.

To turn the tag display on or off—Tag

An MP3 file can contain file information called

“ID3 Tag” where its album name, performer, track title, etc. are recorded.

There are two versions–ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag version 2). Only ID3v1 can be shown.

•	On:	Turns on the ID3 tag display while
		playing MP3 files.
		• If an MP3 file does not have ID3
		tags, folder name and file name
		appear.
		Note:
		If you change the setting from
		“Off” to “On” while playing an MP3
		file, the tag display will be activated
		when the next file starts playing.
•	Off:	Turns off the ID3 tag display while
		playing MP3 files. (Only the folder
		name and file name can be shown.)

52