JVC LVT1055-001A manual Sound Adjustments, Adjusting the sound

SOUND ADJUSTMENTS

Operations of this section are explained using the buttons on the control panel unless mentioned otherwise.

Adjusting the sound

You can adjust the sound characteristics to your preference.

•“Vol Adj” setting is required for each source except FM. Before starting “Vol Adj,” select an appropriate source for which you want to make an adjustment.

1 Select the item you want to adjust.

Each time you press the button,

SEL

the adjustable items change as

follows:

2 Make adjustments.

•To adjust fader and balance—Fad, Bal: You can make these two adjustments at the same time, by referring to the indication on the display.

• Press 5 (up) or ∞ (down) to adjust the fader.

•Press ¢ or 4 to adjust the balance.

Note:

You can also use the ¢ or 4 buttons and FOLDER PRESET 5(up) or

ENGLISH

Fad (Fader)	Vol Adj
Bal (Balance)	(Volume Adjustment)

Canceled

Canceled

Note:

You can also use the SEL button on the remote controller to call up the fader/balance adjustment screen.

Indication	To do:	Range
Fad*	Adjust the front	R06 (Rear only)
	and rear speaker
	balance.	F06 (Front only)
Bal	Adjust the left	L06 (Left only)
	and right speaker
	balance.	R06 (Right only)
Vol Adj	Adjust and store	–12 (min.)
	the input level
	of each source.	+12 (max.)

FOLDER PRESET ∞(down) on the remote controller for adjustment.

•To adjust the input level of each source —Vol Adj:

This setting is required for each source except FM. Before making an adjustment, select an appropriate source for which you want to make an adjustment.

Once you have made an adjustment, it is memorized, and you will not need to adjust the volume level each time you change the source.

Adjust to match the input level to the FM sound level.

To increase the level

To decrease the level

ATT

*If you are using a two-speaker system, set the fader level to “00.”

47