JVC LVT1055-001A manual External Component Operations, Select the external component Line

EXTERNAL COMPONENT OPERATIONS

SRC

ATT							MODE	DISP
SEL	1	2	3	4	5	6	M	D	EQ

ENGLISH

Operations of this section are explained using

the buttons on the control panel unless mentioned otherwise.

Playing an external component

You can connect the external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied).

Preparation:

For connecting the Line Input Adapter KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

Before operating the external component,

select the correct external input correctly by following the procedure below.

•See also “Changing the general settings (PSM)” on page 50.

1Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2Press number button 5 to select “AUDIO”— Audio category of the PSM settings.

3Press ¢ or 4to select “Ext Input”*.

4Turn the control dial clockwise to select “Line In.”

5Press SEL (select) to finish the setting.

•For details, see “To select the external component to use—Ext Input” on page 53.

*Displayed only when one of the following sources is selected—FM, AM, and CD.

1 Select the external component (LINE IN).

Each time you press the button,

SRCthe source changes as described on page 8. When you select a source, the power automatically comes on.

*Displayed only when one of the following sources is selected—FM, AM, and CD.

2 Turn on the connected component and start playing the source.

3 Adjust the volume.

ATT

4 Adjust the sound characteristics you want. (See pages 47 – 49.)

Note:

You can also change the display pattern by pressing DISP (D) repeatedly.

65