ENGLISH

BASIC DISC PLAYBACK

SRC

ATT

 

 

 

 

 

 

MODE

DISP

 

 

 

 

 

 

 

 

 

 

SEL

1

2

3

4

5

6

M

D

EQ

The following marks used in this manual indicate

the playable discs.

DVD Video

Video CD

Video CD

 

with/without PBC

with PBC

Audio CD

MP3 disc

All discs

 

 

listed here

Before performing any operations, make sure

the following....

To watch the playback pictures, select the an appropriate video system (NTSC or PAL) to match it to the connected monitor. (See page 53.)

Turn on the monitor for playing a DVD or VCD. If you turn on the monitor, you can also control the CD and MP3 playback by referring to the monitor screen.

For DVD playback, you can change the Setup Menu setting to your preference. (See pages 43 – 46.)

When you want to operate the DVD/CD player using the buttons on the control panel, see “OTHER DISC OPERATIONS” on pages 35 to 42.

If “ ”appears on the monitor when pressing a button, the disc cannot accept an operation you have tried to do.

In some cases, without showing “ ,” operations will not be accepted.

Starting playback

1 Open the control panel.

Disc loading lamp

2 Insert a disc into the loading slot.

The disc loading lamp start flashing, and the unit draws in the disc automatically.

DO NOT insert a disc while the disc loading lamp is flashing* or is not lit**.

*Flashing: while loading or ejecting a disc **Not lit: when a disc has been loaded.

3 Close the control panel by hand.

The disc type is automatically detected, and playback starts automatically. (If a disc is CD, VCD without the PBC function, or MP3, playback will be repeated until you stop it.)

If a menu appears while playing a DVD or VCD with PBC function, see “Menu operations” on page 24.

18

Page 18
Image 18
JVC LVT1055-001A manual Basic Disc Playback, Starting playback, Open the control panel, Insert a disc into the loading slot