JVC LVT1055-001A manual Listening to the radio, Searching for a station automatically Auto search

	RADIO OPERATIONS
SRC
ATT	MODE
	DISP
SEL	1 2 3 4 5 6 M D EQ

ENGLISH

The operations of this section are mainly	Note:
explained using the buttons on the control panel.	This receiver has three FM bands (FM1, FM2,
When the remote controller can be used for the	FM3). You can use any one of them to listen to an
same operations, it is then explained.	FM broadcast.

Listening to the radio

You can use either automatic searching or manual searching to tune in to a particular station.

Searching for a station automatically: Auto search

This operation is also possible from the remote controller.

1 Select the band (FM1 – 3, AM).

1Press SRC (source)

SRC

repeatedly to select the tuner.

2Press and hold SRC.

Each time you press and hold the button, the band changes.

FM1 FM2 FM3 AM

Selected band appears.

Lights up when receiving an FM stereo broadcast with sufficient signal strength.

2 Start searching for a station.

To search for stations of

higher frequencies

To search for stations of lower frequencies

When a station comes in, searching stops.

To stop searching before a station is received,

press the same button you have pressed for searching.

When using the remote controller

1Press FM or AM.

• When selecting the FM bands,	FM
	DAB
press FM repeatedly until the
band you want is selected.	AM

2Press ¢ or 4 to start

searching.

11