JVC LVT1055-001A manual Storing your own sound adjustments, Store the adjustment you made

Storing your own sound adjustments

You can adjust the sound modes to your preference and store your own adjustments in memory (User 1, User 2, and User 3).

•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

1 Press EQ (equalizer) once.

EQ

4 Make adjustments as you like.

1)Press ¢ or 4 to select the frequency band—60Hz, 150Hz, 400Hz, 1kHz, 2.4kHz, 6kHz, 12kHz.

2)Press 5 (up) or ∞ (down) to adjust the level of the selected band within the range of –05 to +05.

3)Repeat steps 1) and 2) to adjust the other frequency bands.

5 Store the adjustment you made.

ENGLISH

Ex.: When you have selected “Country” previously

•If you press the button twice, the level meter selection screen appears (see page 10).

2 Select the sound mode you want to adjust.

SEL

The confirmation message appears—whether you want to

store the adjustment.

1 2 3 4 5 6

•This unit has two sound mode selection screens. To move to the other screen, press 5 (up) or ∞ (down).

3 Enter the sound adjustment mode.

The following sound mode adjustment screen appears on the

display.

If you want to cancel the adjustments,

press EQ (equalizer).

•Adjustment you made remains effective until you select another sound mode.

6 Select one of the user sound modes (User 1, User 2, or User 3) you want to store into.

1 2 3 4 5 6

Ex.: When you select “User 1”

49