BASIC OPERATIONS

ENGLISH

SRC

ATT

 

 

 

 

 

 

MODE

DISP

 

 

 

 

 

 

 

 

 

 

SEL

1

2

3

4

5

6

M

D

EQ

2 1, 3

Turning on the power

1 Turn on the power.

ATT

Note on One-Touch Operation:

When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.

3 Adjust the volume.

ATT

Volume level appears.

Current sound (iEQ) mode (see page 48)

2 Select the source.

4 Adjust the sound as you want. (See

SRC

Each time you press the button,

the source changes as follows.

pages 47 – 49.)

 

*1

*2

*3

TUNER

 

DISC

 

CD-CH or LINE IN

 

 

 

 

(CD changer)

To operate the tuner (FM or AM), see pages 11 – 15.

To play a disc,

see pages 16 – 46.

To operate the CD changer, see pages 59 – 64.

To operate the external component (LINE IN), see page 65.

*1 If a disc is not in the loading slot, you cannot select “DISC” as the source to play.

*2 Without connecting a CD changer, you cannot select it as the source to play.

*3 To select “LINE IN,” select “Line In” for the “Ext Input” setting on page 53.

8

Note:

While playing a source, you can also show the level meter on the display. For details, see “Activating the level meter” on page 10.

To drop the volume in a moment

Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.

To resume the previous volume level, press the button briefly again.

If you turn the control dial, you can also restore the sound.

To turn off the power

Press for more than 1 second.

If you turn off the power while listening to a disc, playback will start from where playback has been stopped previously, next time you turn on the power.

Page 8
Image 8
JVC LVT1055-001A manual Basic Operations, Turning on the power, To drop the volume in a moment, To turn off the power