JVC LVT1055-001A manual Activating the level meter, Meter, Off

ENGLISH	5	Set the clock system.
		1 Select “24H/12H.”
		2 Adjust “24Hours” or “12Hours.”
		1	2
			ATT
	6	Finish the setting.

SEL

To check the current clock time when the unit

is turned off, press DISP (D).

The power turns on and the clock time is shown for about 5 seconds, then the power turns off.

Activating the level meter

You can show the level meters on the display while playing any source. This unit is equipped with three level meter patterns.

•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

1 Press EQ (equalizer) twice.

Last selected level meter

EQ appears on the display.

•If you press the button only once, the sound selection screen appears (see page 48).

2 Select the level meter pattern you want.

As you turn the control dial, the level meters

change as follows:

Off 1

ATT

3 2

Meter 1:

The audio level meter fluctuates vertically.

Meter 2:

The speaker on the display vibrates as input audio level changes.

Meter 3:

The left and right audio level meters appear.

•If the display pattern is changed, only one audio level meter will be shown.

Off:

No level meter is shown. The source animation appears.

NOTICE:

The illustrations of the display used in this manual are mainly of the initial setting when shipped from the factory. If you have changed the display patterns or some PSM items, the actual displays you see will be different.

10