If the flame needs adjusting:

1.Turn the oven off. Wait for the oven burner to cool down.

2.Open oven door and remove oven racks, oven tray, flame spreader and set aside.

A

A

B

C

A. Oven tray (lift up at area shown to remove)

B.Screws

C.Flame spreader

3.Locate the air shutter near the rear wall of oven and loosen the shutter screw.

A

B

A. Shutter screw

B. Air shutter

4.Adjust the air shutter.

5.Turn the oven back on and check for proper flame. If the flame is still not properly adjusted, turn the oven off, wait for the oven burner to cool down and repeat step 4 until flame is properly adjusted.

6.When the flame has been properly adjusted, turn the oven off, wait for the burner to cool down.

7.Tighten the shutter screw.

8.Reinstall flame spreader and oven tray. Reinstall the oven racks and close oven door.

9.Close the broiler door.

Complete Installation

1.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

2.Check that you have all of your tools.

3.Dispose of/recycle all packaging materials.

4.Check that the range is level. See “Level Range.”

5.Use a mild solution of liquid household cleaner and warm water to remove waxy residue caused by shipping material. Dry thoroughly with a soft cloth. For more information, see the “Range Care” section of the Use and Care Guide.

6.Read the Use and Care Guide.

7.Turn on surface burners and oven. See the Use and Care Guide for specific instruction on range operation.

If range does not operate, check the following:

■Household fuse is intact and tight, or circuit breaker has not tripped.

■Range is plugged into a grounded 3 prong outlet.

■Electrical supply is connected.

■See “Troubleshooting” in the Use and Care Guide.

8.When the range has been on for 5 minutes, check for heat. If the range is cold, turn off the range and check that the gas supply line shutoff valve is open.

■If the gas supply line shutoff valve is closed, open it, then repeat the 5-minute test as outlined above.

■If the gas supply line shutoff valve is open, press the CANCEL button on the oven control panel and contact a qualified technician.

If you need Assistance or Service:

Please reference the “Assistance or Service” section of the Use and Care Guide or contact the dealer from whom you purchased your range.

11

Page 10 Page 12
Page 11
Image 11
Whirlpool W10200946A Complete Installation, If the flame needs adjusting, If you need Assistance or Service
Page 10 Page 12

W10200946A specifications

The Whirlpool W10200946A is an innovative and versatile kitchen appliance that stands out for its impressive array of features and technologies designed to enhance culinary experiences. This dishwasher offers a perfect blend of convenience, efficiency, and performance, making it an essential addition to any modern kitchen.

One of the main features of the W10200946A is its advanced cleaning technology. This model utilizes a powerful wash system that ensures dishes come out sparkling clean every time. With multiple wash cycles available, users can select the perfect setting for any load, from heavily soiled pots and pans to delicate glassware. The Sensor Cycle option automatically detects the level of soil on the dishes and adjusts the wash and rinse settings accordingly, optimizing water and energy usage while providing a thorough cleaning.

In terms of capacity, the W10200946A does not disappoint. It boasts a spacious interior that can accommodate up to 13 place settings, making it ideal for families or those who frequently entertain guests. The model features adjustable upper racks, allowing users to customize the interior space to fit taller items and bulky cookware.

Energy efficiency is another hallmark of this dishwasher. It is designed to operate on low water consumption, making it an eco-friendly choice that can help reduce utility bills. The ENERGY STAR certification reflects its commitment to environmental sustainability without sacrificing performance.

Moreover, the W10200946A incorporates a Quiet Wash sound insulation system, ensuring that the dishwasher operates at an exceptionally low noise level. This feature is particularly beneficial for open-concept living spaces where peace and quiet are essential.

Ease of use is prioritized with the user-friendly control panel, which is intuitive and straightforward. The delayed start option allows users to set the machine to run at a more convenient time, while the time remaining display provides at-a-glance updates on cycle progress.

In conclusion, the Whirlpool W10200946A is an exemplary dishwasher that combines cutting-edge technology with practical features. Its powerful cleaning capabilities, spacious design, energy efficiency, and quiet operation make it a valuable addition to any household. Whether you are looking to upgrade your current dishwasher or install a new one, the W10200946A stands out as a reliable and efficient choice.
Top Page Image Contents