axis international marketing 2130R PTZ manual Installation, Before connecting the hardware

AXIS 2130/2130R User’s Manual Installation 9

Installation

•Quick installation - Follow the instructions below to quickly install on an Ethernet network.

•Easy installation - See The AXIS IP Installer, on page 24.

Before connecting the hardware

1.Note the serial number on the underside of the unit. You need to know this to set the IP address. The 12-digit serial number is the same as the Ethernet address, e.g. Ser.No: 00408C1A2B3C = Ethernet Address:

00-40-8c-1A-2B-3C

2.From a computer on your network, assign your AXIS 2130 with a unique IP address using the appropriate method for your operating system.

	Windows only - Start a Command Prompt and type these commands:		UNIX only - Type this in your command line:
	Syntax:			Syntax:
	arp -s <Server IP address> <Ethernet address> <my PC IP address>			arp -s <IP address> <Ethernet address> temp
	ping -t <Server IP address>			ping <IP address>
	Example:			Example:
	arp -s 172.21.1.200 00-40-8c-10-00-86 172.21.1.193			arp -s 172.21.1.200 00:40:8c:10:00:86 temp
	ping -t 172.21.1.200			ping 172.21.1.200
Note:		In some Unix systems, the ARP command can be located in a directory that is not on the
		command path. Administrator rights may be required.

Connecting the hardware

1.Connect an Ethernet cable to the

Ethernet connector and attach it to the	Ethernet
network.
	Connector

2.Connect the power cable to the power

supply connector and connect it to the			Network
main power supply.			Indicator
3. Ensure that the Power Indicator		Terminal connector
	Power supply
(on the front panel) is permanently lit
and that the Network Indicator
flashes intermittently.

4.Approximately 10-15 seconds after connecting the power supply, the following message (or similar) is returned:‘Reply from 172.21.1.200’

5.Exit Ping.

The initial installation is complete. You can now access the AXIS 2130 directly from your browser, as described below.