PTZ CONTROL
The PTZ control is available for cameras that support PTZ functions using Pelco C, Pelco P, and Pelco D protocols. It is also available for supported
NOTE: When operating
Figure 3. PTZ Control
Exit: Closes the PTZ control.
Move: Pans and tilts the camera in the direction of the selected arrow.
| Speed: Selects the PTZ speed. |
| ZOOM: Zooms the camera in and out. |
| FOCUS: Adjusts the camera focus. |
| IRIS: Opens and closes the camera iris. |
| PRESET NUMBER: Displays the preset number. |
| Keypad: Use the numeric keypad to enter presets or pattern numbers. |
PRESET | PRESET: Performs two functions: |
•Preset programming mode: Stores the preset in the selected memory location.
•PTZ mode: Activates a preset.
PATTERN | PATTERN: Performs two functions: |
•Pattern programming mode: Stores the pattern in the selected memory location.
•PTZ mode: Activates a pattern.
SET | SET: Performs two functions: |
•Enters PTZ configuration mode.
•Exits PTZ configuration mode.
CLR | Clear: Deletes a configuration preset, pattern, or tour. |
|
|
AUX | Program: Accesses the camera configuration mode. |
|
|
PGM | Auxiliary: Unsupported at this time. |
10 | C4655M (2/11) |