Pelco C540M (6/98), CM9760-KBR To Leave Setup Mode, Creating a Setup PIN, Creating a Define PIN

Page 11

3.2.2To Leave Setup Mode

1.Select and return DIP switch 2 to the OFF position.

3.2.3Creating a Setup PIN

ADVANCE SETUP 4

>SETUP PIN ****

CONFIRM ****

DEFINE PIN ****

CONFIRM ****

NOTE: A PIN is required to enter SETUP mode.

The factory settings for the CM9760-KBD include the default password 1234. An alternative password can be defined as follows:

1.While in setup mode, use and/or to locate Advance Setup 4.

2.Select , type a four-digit PIN, and select once again.

3.Select Confirm, retype the PIN, and select once again.

3.2.4 Creating a Define PIN

NOTE: A PIN is required to use the features that are accessible via the DEFINE menu.

The factory settings for the CM9760-KBD include the default password, 1234. An alternative password can be defined as follows:

1.In setup mode, use and/or to locate Advance Setup 4.

2.Select Define PIN using and/or .

3.Select , type a four-digit PIN, and select once again.

4.Select Confirm, retype the PIN, and select once again.

3.2.5 Calibrating the Joystick

JOYSTICK SETUP

XXX

XXX (XXX, XXX) XXX

XXX

To make the joystick operational, proceed as follows:

1.In setup mode, select .

2.With the joystick in the central default position, select .

3.Move the joystick fully left, and select .

4.Move the joystick fully right, and select .

5.Move the joystick fully down, and select .

6.Move the joystick fully up, and select .

7.Save the joystick configuration by selecting .

8.Select .

3.2.6 Adjusting the Display Brightness

While in setup mode, the brightness of the display can be adjusted. This is done by

LCD BRIGHTNESS SETUP

 

selecting

, after which the display may be brightened or darkened using

NOTE: The display brightness can

or

. When satisfied with the brightness setting, press

followed by

.

also be adjusted by selecting

from

 

 

 

 

the define sub-menu. The define sub-

menu is produced by selecting .

Pelco Manual C540M (6/98)

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Esc Contents Advanced Operation Preset Camera Positions Manual # Date Comments List of IllustrationsRevision History FCC Important Safeguards and WarningsGeneral CertificationsCM9760-KBR-X Same as CM9760-KBR except 230 VAC, 50 Hz Main FeaturesDescription ModelsKeypad Physical LayoutLCD Display Multipurpose Function KeysLens Control Function ControlAssign functions to user-definable control keys Installation and SetupSetup To Activate Setup ModeCM9760-CC1 CM9760-KBD Basic Keyboard Setup Configuration and WiringCreating a Define PIN To Leave Setup ModeCreating a Setup PIN Adjusting the Display BrightnessCamera Direct Control Direct Camera Control/Serial Port SpeedsSerial Port Speeds Configuring the RelaysSetup information that can be downloaded/uploaded includes Setting Up a Receiver/DriverDownloading Keyboard Setups Keyboard Define ModeDownloading Keyboard to Keyboard Setups are downloaded keyboard to keyboard byAssigning Logical Camera Numbers Downloading Through the CM9760 System Adjusting the Time-out PeriodTesting the Serial Ports Diagnostics ModeTesting the Display Testing the KeysLogging on OperationIntroduction OverviewSelecting Cameras Using the keypad, enter a monitor number, and then press orLogging OFF Selecting MonitorsSelecting Group Cameras Locking Cameras or Input DevicesGroup Input Selection Overriding Camera Locks Operating PTZ CamerasOverriding Camera Control Deleting Presets Preset Camera PositionsRecalling Presets Creating PresetsTo control VCRs, see .3 GPI control VCR Recording with the Pelco Alarm Interface Unit AIUVCR Control VCR Control Via the Pelco IR ControllerMacros Type the GPI number using the keypad and then pressGPI Control Selecting GPIsFinding Macros Pausing MacrosRestarting Macros Creating Temporary Macros Deleting MacrosVideo Loss Camera is disabledCamera Sequences Setting the Time and DateOr select AlarmsArming Alarms Disarming AlarmsResetting Triggered Alarms Alarm StatusResetting Alarms Appendix B. Icon Legend AppendicesAppendix A. Keyboard LCD Default Menu and Tree List Appendix B. Icon Lagend RS-232 Serial Port Appendix C. Keyboard Connector Pin-OutsRS-422 Serial Port JP5 Pin I2C Bus PortJP4 Pin Function Relay PortSame Direction Appendix D. Keyboard-to-Keyboard Cabling ConnectionsOpposite Tree DIP Switch 2 on Appendix E. Setup Mode MenuDiagnostic Mode DIP Switch Test Appendix F. Diagnostic Mode Menu Tree DIP Switch 1 onDiagnostic Mode LCD Test Keyboard Test Diagnostic Mode Serial Port TestGeneral Appendix G. CM9760-KBD SpecificationsElectrical OperationalReturns Warranty and Return InformationWarranty

C540M (6/98), CM9760-KBR specifications

The Pelco CM9760-KBR and C540M (6/98) are part of Pelco’s renowned line of video management solutions, tailored for both security and surveillance operations. These devices embody the cutting-edge technology and features that Pelco is known for, providing flexibility, functionality, and seamless integration in diverse environments.

The Pelco CM9760-KBR is a sophisticated keyboard and control system designed to manage various cameras and monitor systems effectively. It is equipped with an intuitive interface that allows operators to control PTZ (pan-tilt-zoom) cameras, adjust settings, and navigate between multiple camera feeds effortlessly. The user-friendly design of the CM9760-KBR ensures that even operators with minimal training can efficiently manage surveillance tasks.

One of the standout features of the CM9760-KBR is its ability to interface with multiple Pelco systems, making it highly compatible and adaptable for various surveillance setups. The keyboard supports a wide range of configurations and can integrate with different Pelco video multiplexers and decoders, offering a comprehensive control mechanism for video feeds.

The C540M is a reliable monitor that complements the CM9760-KBR, ensuring that operators have a clear view of their surveillance areas. It provides high-resolution video output, enabling detailed observation and analysis, which is critical in security monitoring. The monitor's robust construction and quality display make it suitable for both indoor and outdoor environments, maintaining performance even under challenging conditions.

Both the CM9760-KBR and C540M are designed to prioritize security features. They incorporate advanced encryption technologies to protect data and ensure privacy, which is essential for compliance with various regulatory standards. Additionally, the devices support remote access capabilities, allowing security personnel to monitor and manage their systems from offsite locations, enhancing operational flexibility.

In terms of technology, Pelco’s commitment to innovation is evident in these products. They utilize state-of-the-art video processing technology to deliver high-quality images, even in low-light conditions. This ensures that surveillance is effective 24 hours a day, making it easier to track movement and identify potential security threats.

In summary, the Pelco CM9760-KBR and C540M (6/98) are integral components of modern surveillance systems. With their advanced features, robust design, and high compatibility, they provide security professionals with the tools they need to ensure comprehensive monitoring and protection across various applications. Pelco continues to set the standard in surveillance technology, making their products a preferred choice for security operations worldwide.
Top Page Image Contents