Pelco CM9760-KBR, C540M (6/98) operation manual Contents

CONTENTS

Section				Page
1.0	GENERAL		...............................................................................................	5
	1.1	IMPORTANT SAFEGUARDS AND WARNINGS		5
	1.2	CERTIFICATIONS		5
2.0	DESCRIPTION			6
	2.1	MAIN FEATURES		6
	2.2	MODELS		6
	2.3	PHYSICAL LAYOUT		7
		2.3.1	LCD Display	7
		2.3.2	Multipurpose Function Keys	7
		2.3.3	Keypad	7
		2.3.4	User Definable Control Keys	7
		2.3.5	Function Control	8
		2.3.6	Lens Control	8
3.0	INSTALLATION AND SETUP			9
	3.1	INSTALLATION		9
	3.2	SETUP		9
		3.2.1	To Activate Setup Mode	9
		3.2.2	To Leave Setup Mode	11
		3.2.3	Creating a Setup PIN	11
		3.2.4	Creating a Define PIN	11
		3.2.5	Calibrating the Joystick	11
		3.2.6	Adjusting the Display Brightness	11
		3.2.7	Direct Camera Control/Serial Port Speeds	12
		3.2.8	Configuring the Relays	13
		3.2.9	User Definable Control Keys	14
		3.2.10	Setting Up a Receiver/Driver	14
		3.2.11	Downloading Keyboard Setups	14
		3.2.12	Assigning Logical Camera Numbers	15
			3.2.12.1 Downloading Keyboard to Keyboard	15
			3.2.12.2 Downloading Through the CM9760 System	16
		3.2.13	Adjusting the Time-out Period	16
	3.3	DIAGNOSTICS MODE		17
		3.3.1	Testing the display	17
		3.3.2	Testing the keys	17
		3.3.3	Testing the serial ports	17
		3.3.4	Testing the dip switch	17
4.0	OPERATION			18
	4.1	INTRODUCTION		18
	4.2	OVERVIEW		18
	4.3	LOGGING ON		18
	4.4	LOGGING OFF		19
	4.5	SELECTING MONITORS		19
	4.6	SELECTING CAMERAS		19
	4.7	LOCKING CAMERAS OR INPUT DEVICES		20
	4.8	GROUP INPUT SELECTION		20
		4.8.1	Selecting Group Cameras	20
	4.9	OPERATING PTZ CAMERAS		21
	4.10 OVERRIDING CAMERA CONTROL			21
	4.11 OVERRIDING CAMERA LOCKS			21

2 Pelco Manual C540M (6/98)