5.0ADVANCED OPERATION
5.1PRESET CAMERA POSITIONS
NOTE: Presets are only possible when receiver/drivers, zoom lenses and/or pan/tilt heads are fitted with preset facilities.
A preset camera position is a set of parameters which define pan, tilt, zoom and focus adjustments. A preset camera position can be recalled as follows:
1.Manually, using the CM9760 keyboard
2.Automatically as the result of an alarm condition (refer to the 9760 alarm file)
3.From a macro command
5.1.1Recalling Presets
1.Using the keypad, enter the preset number.
2.Select or press .
5.1.2Creating Presets
NOTE: Your define PIN need only be entered once during operation. The default PIN is 1234. To alter the define PIN, see Section 3.0, Installa- tion and Setup.
1.Display the define
2.Enter your
3.Using the joystick and camera control keys, set up the camera preset re- quired.
4.Using the keypad, enter a preset number between 1 and 99.
5.Select .
6.Select to revert to the default menu.
5.1.3Deleting Presets
1.Display the preset
pressing .
2.Using the numeric keypad, enter the number of the preset that you wish to delete.
3.To delete the preset, select .
4.Select to revert to the default menu.
22 | Pelco Manual C540M (6/98) |