Page 14
Graphical User Interface
3.3.8Trigger
Use the option buttons to select either Active High or Active Low.
FIGURE 24. Set “Trigger” by clicking the desired option button.
3.3.9LUT (Look-Up Table)
The Knee Control box allows you to set your own knee value to each LUT. For more detail regarding knee control, “Programmable
3.3.9 (a) Positive or Negative LUT Selection
The LUT control panel allows you to select the positive or negative LUT. Choosing “Positive” provides a normal image. Choosing the “Negative” option causes the image to appear reversed, as in a film negative.
FIGURE 25. Set “Positive” or “Negative” LUT.
3.3.9 (b) LUT (Look-Up Table) Table Selection
The LUT Table