JAI TM/TMC-4200CL TM-4200CL Command Response Table, Command Parameter End of Cmd Description

								Page 51
							Serial Communication Kit
Command		Parameter	End of	Ack. Response		Description
			Cmd
:SGE=		X	<cr>	:o<cr>		Set Digital Output Interface
						(X = 0 CameraLink, X = 1 GigE)
:CCD=		X	<cr>	:o<cr>		CCD information (X = 1)
:PuLX		X	<cr>	:o<cr>		Password (X = 1 Administrator, X
						= 0 Users)
Note: If a command is not accepted for any reason, the camera will return a “nack”
response. “:e” <cr> *Not available yet.
TABLE 8.	TM-4200CL Command Response Table
Command		Parameter	End of Cmd		Description
Byte 1, 2		Master Gain			Master Gain (H'0000 - H'0FFF: -3dB - +12dB)
Byte 3, 4		R Channel Fine			R Channel Fine Gain (H'0000 - H'0FFF)
		Gain
Byte 5, 6		Master Offset			Master Offset (H'0000 - H'0FFF)
Byte 7, 8		R Channel Fine			R Channel Fine Offset (H'0000 - H'0FFF)
		Offset
Byte 9		Function Flag 0
		Bit 0	Scan Area 0		0000=2048x2048		0001=2048x1000
					0010=2048x500		0011=2048x250
		Bit 1	Scan Area 1		0100=2x2 binning of 2048x2048 1111=User
					Programmable Scan Area
		Bit 2	Scan Area 2		1000=Digital Zoom x1			1001=Digital Zoom x2
		Bit 3	Scan Area 3		1000=Digital Zoom x3			1001=Digital Zoom x4
		Bit 4	Rsvd
		Bit 5	Rsvd
		Bit 6	Pixel Output		00=<---<---	01<=<------>
			Order 0
		Bit 7	Pixel Output		10=<<------
			Order 1
Byte 10		Function Flag 1
		Bit 0	Shutter 0		Continuous Mode: 0000 - 1001=Continuous pre-
					set shutter 0 - 9

TM/TMC-4200CL Series Progressive Scan Cameras