Page 27
Installation
5.2.5Attaching the Analog Video Output
When connecting the TM-4200CL to an analog frame grabber or a monitor, use the BNC connector on the back panel of the camera. The input of the monitor should be balanced for 75 ohms termination. Standard RG-59 type coaxial cable should carry a full video signal for up to 500 feet. The TM-4200CL has a two-row binning mode that can be used to display real-time images on the PVM-942 or PVM- 1242 monitors. These monitors are specially modified to accept a 30Hz progressive scan image.
The multi-conductor cable 12P-02S can transmit analog video, power, sync. signals, and serial communication. The mini coaxial leads in JAI multi-conductor cables are designed for short runs of no longer than 50 feet.
Note: Make sure that no extraneous wires are visible which could cause a short.
5.2.6Attaching the Camera Lens
The TM-4200CL camera accepts 1.2-inch or larger format size C-mount lenses. To attach the C-mount lens1 to the camera, carefully engage the threads and rotate the lens clockwise until it firmly seats on the mounting ring. Do not force the lens if it does not seat properly. Please note that some lenses with extremely long flangebacks may exceed the mounting depth of the camera.
1.C-mount to F-mount and C-mount to K-mount adapters are available for larger format lenses (35mm). Check with local photography dealers for these lens adapters.
TM/TMC-4200CL Series Progressive Scan Cameras