Page 16
Graphical User Interface
3.3.9 (c) Knee Control
The Knee Control graphical control allows you to change two knee point values visually by clicking and dragging the “knee line.” You may also enter X1, Y1, X2, Y2 values directly to adjust the knee curve. When you have chosen the value you want and are ready to set this value to the camera, click the “Send Knees” button.
3.3.10 Report Section
The report frame on the bottom of the DualTap AccuPiXEL window provides information about the current settings. The report usually shows the last action, so you can verify at a glance if the camera received a command. After taking an action, such as Send Knees, go to the bottom of the Dual Tap AccuPiXEL TM4200 and click on the Report button. The frame updates to show the most recent action carried out by the camera.
FIGURE 29. The report frame shows the recent camera actions.
To check the entire configuration click on the report button and note the string that appears. To read this string refer to
FIGURE 30. A table helps users understand the report screen.
3.3.11 Main Menu: “Option”
3.3.11 (a) Password
Please contact JAI PULNiX for password access. The password allows access to the EEPROM to rewrite factory default settings.