JAI CV-M77 operation manual Camera Housing and Dimensions

CV-M77

4 Camera Housing and Dimensions

26 (1.02)

5	50	4-M3 depth5
(0.2)	(19.7)		5 3	6	7
50	90	7.6
(1.97)	(3.54)	(0.3)
			R
40 (1.57)		4	MG
			SW1B	RS-232CTRIG	DCIN
1 (C-Mount)				RGB/ SYNC
					8
2 (CCD chip)		4-M3 depth5
5	50
(0.2)	(19.7)
26 (1.02)

11

Figure 4-1

1Lens mount of C-mount type. *1)

21/3" interline transfer CCD progressive scan sensor with square pixels and

	primary mosaic filter
3	R Gain Potentiometer.	To adjust Red gain level manually.
4	B Gain Potentiometer.	To adjust Blue gain level manually.
5	MG Gain Potentiometer.	To adjust Master gain level manually.

66 pin connector for RS 232C signals, input of ext. trigger pulse and WEN output.

712 pin connector for +12V DC power and HD/VD input/output.

89 pin D-Sub connector for RGB video output, video synchronization output and pixel clock output.

9Switch to set shutter speed and function mode.

10Screw holes for tripod mounting plate (optional plate)

114 M3 mounting threads. *2)

*1) Note: Rear protrusion on C-mount lens must be less than 6mm (0.24-inch approx.)

*2) Note: Notice depth of thread is only 5mm. Too long screws may harm inside electronics.

- 6 -