JAI CV-M10 operation manual Internal adjustments on BX, Potentiometer locations on PK8206A

Page 17

CV-M10BX/CV-M10RS

9. Internal adjustments on BX

For CV-M10BX there are internal potentiometers for adjusting the two video outputs. Do not touch these adjustments unless you are familiar with video camera adjusting.

The potentiometers are found on the PK8206A board in CV-M10BX.

For CV-M10RS the same adjustments can be done via RS232C with the camera control tool. See "10. CV-M10RS Camera Control Tool."

The adjustments are for the following functions:

Black level. Factory setting is 20 mVpp ±5 mV

Video 1 AGC level. Factory setting is 700 mVpp ±30 mV. White clip level. Factory setting is 800mVpp ±20 mV

Video 1 and Video 2 gain. Factory setting to same video level on both outputs. VSUB on the CCD sensor. Do not touch this adjustment.

9.1. Potentiometer locations on PK8206A

VR6: Video 2 Black Level

VR2: Video 1 Gain Level

VR5: Video 1 White Clip Level

VR1: CCD Vsub adjust. Do not touch.

VR3: Video 1

AGC Level

JP13

JP12

VR7: Video 1

Black Level

 

VR4: Video 2 White Clip Level

 

VR8: Video 2

Gain Level

 

 

- 14 -

Image 17
Contents CV-M10 Declaration of Conformity Table of Contents Standard Composition Main FeaturesGeneral Locations and Functions CV-M10BXPin Assignment Pin Multi-connector DC-IN/SYNCPin Multi-connector RS 232C/TRIGGER Input of External HD/VD signals Input/Output of HD/VD SignalOutput of Internal HD/VD signals Functions and OperationPulse Width Control Trigger Mode External Trigger ModeEdge Pre-select Trigger Mode Pre-select 7HD14HD Mode Setting by Switch Mode SettingsTrigger select Scanning ModeShutter Time select CV-M10RS Serial Interface for Controls Gamma CorrectionGain Control/RS 232C control Jumper settings Location of Jumper on PK8187A Locations of JumperLocation of Jumper on PK8189A Location of Jumper for CV-M10RS on PK8190A Location of Jumper for CV-M10BX on PK8206APotentiometer locations on PK8206A Internal adjustments on BXCV-M10RS Camera Control Tool Levels Window Files and Camera Communication Window 140.57 700 Typical CCD Characteristics PrecautionsAppendix ReferencesIndex User’s RecordCamera type Revision Revision F Serial No2700- 11052 E F3