JAI operation manual CV-M10RS Camera Control Tool

Page 18

CV-M10BX/CV-M10RS

10. CV-M10RS Camera Control Tool

A camera control tool for CV-M10RS is available. It runs under Windows 98 and NT.

After installation a bar is shown on the screen. From here windows for each function group can be opened for camera control. In the following the bar and windows are shown.

10.1.Control Bar for CV-M10RS Camera Control

10.2.About and Help Window

10.3. Shutter Window

10.4. Gain Window

- 15 -

Image 18

Contents CV-M10 Declaration of Conformity Table of Contents Main Features GeneralStandard Composition CV-M10BX Locations and FunctionsPin Multi-connector DC-IN/SYNC Pin Multi-connector RS 232C/TRIGGERPin Assignment Output of Internal HD/VD signals Input/Output of HD/VD SignalInput of External HD/VD signals Functions and OperationExternal Trigger Mode Edge Pre-select Trigger ModePulse Width Control Trigger Mode 7HD Pre-select14HD Mode Settings Mode Setting by SwitchScanning Mode Shutter Time selectTrigger select Gamma Correction Gain Control/RS 232C controlCV-M10RS Serial Interface for Controls Jumper settings Locations of Jumper Location of Jumper on PK8189ALocation of Jumper on PK8187A Location of Jumper for CV-M10BX on PK8206A Location of Jumper for CV-M10RS on PK8190AInternal adjustments on BX Potentiometer locations on PK8206ACV-M10RS Camera Control Tool Levels Window Files and Camera Communication Window 140.57 700 Appendix PrecautionsTypical CCD Characteristics ReferencesCamera type User’s RecordIndex Revision Revision F Serial No2700- 11052 E F3