JAI CV-A33CL operation manual Specification table

Page 24

 

 

CV-A33CL

 

 

 

 

9.2. Specification table

 

 

 

 

 

Specifications

 

CV-A33CL

Scanning system

Progressive scan

Pixel clock

 

40.000 MHz (25 nsec)

Line frequency

 

59.44 kHz (673 pixels clock/line) (16.825 sec)

Frame rate

 

118.4 frames/sec. (502 lines/frame) (8.44615 msec)

CCD sensor

 

1/2” progressive scan monochrome

 

 

CMOS image sensor: Micron MT9V403C12 STM

Sensing area

 

6.61 (h) x 4.97 (v) mm

Cell size

 

9.9 (h) x 9.9(v) m

Effective pixels

667 (h) x 502 (v)

Pixels in video output Full

659 (h) x 493 (v) 118.4 fps

Window

>2 (h) x >3 (v)

Max window scan frame rate

<4953 fps.

659 (h) x 3 (v)

Auto trigger sensing rate

<5403 fps.

659 (h) x 3 (v)

Sensitivity on sensor

13 Lux (Min. gain, shutter 1/120, 100% video)

 

 

1.2 Lux (Max. gain, shutter 1/120, 50% video)

S/N ratio

 

>45 dB

Digital video output

10/8 bits in Camera Link

Gain

 

Remote

Gain range

 

0 to +15 dB

Synchronization

Int. X-tal. Ext. random trigger

Inputs

Camera Link

Ext. trigger

 

TTL

Ext. trigger TTL 4 V ±2 V. (TTL or 75 terminated)

Outputs

Camera Link

Pixel clock, LVAL, FVAL, DVAL, EEN

 

TTL

EEN (4 V from 75 )

Control interface

TXD and RXD via RS 232C

 

 

TDX and RDX via Camera Link

Trigger modes

 

Continuous, Edge pre-select, Pulse width control, Auto trigger

Accumulation

 

LVAL a-synchronous

Shutter

 

Global (simultaneous exposure for all pixels)

Read out modes

Full or Partial as user selectable window of interest

Shutter speed (fixed)

1/120 through 1/20,000 second

Programmable exposure

1 LVAL to 492 LVAL (16.8 sec. to 8.3 msec.)

Pulse width control

>1 LVAL to <237 FVAL (>16.8 sec. to <2.0 sec.)

Partial readout window of interest

X origin, Y origin, X width, Y height

 

 

With 1 pixel increment

Functions controlled by

Shutter, Trigger, Scanning, Readout,

RS 232C

 

Trigger input, Black level and Gain

Operating temperature

-5°C to +45°C

Humidity

 

20 – 80% non-condensing

Storage temp/humidity

-25°C to +60°C/20% to 90%

Vibration

 

10G (20Hz to 200Hz in all directions)

Shock

 

 

70G

EMC

 

CE (EN50081-1 and EN50082-1), FCC part 15, UL94

Power

 

12V DC ± 10%. 2.5 W

Lens mount

 

C-mount (Flange back 17.526 mm ±0.05mm)

 

 

Image centre ±0.1mm from C-mount centre

Dimensions

 

35 x 44 x 58 mm (HxWxD)

Weight

 

 

120g

- 23 -

Image 24
Contents CV-A33CL CV-A33CL Main Features GeneralStandard Composition Locations and Functions LocationsPin Multi-connector DC-IN/Trigger Digital Output Connector for Camera LinkPin Assignment Input and Output Circuits EEN outputCamera Link interface CV-A33 Camera Camera Link CableFunctions and Operations Basic functionsCmos Sensor Pixel principleCmos Sensor principle diagram Column ProcessCV-A33 Cmos Sensor array Window of Interest Auto Trigger Window of InterestSensor layout and timing Effective image formatVertical timing Normal mode. Full frame Horizontal timing Normal mode. Full frameLval a-synchronous accumulation Lval a-synchronous accumulationTiming for window of interest Window of interestInput/Output of Timing Signals Input of Timing SignalsOutput of Timing Signals Trigger ModesEdge Pre-select Mode Continuous Operation Non triggeredVertical timing for edge pre-select min. exposure Pulse Width Control Mode Vertical timing for pulse width control min. exposureAuto trigger Mode Vertical timing for auto trigger functionConfiguring the Camera Switch setting insideOther Functions RS-232C control CV-A33CL command list Parameter RemarksCamera Control Tool for CV-A33 Window from camera control toolExternal Appearance and Dimensions SpecificationsSpectral sensitivity Specification table CV-A33CLPrecautions Typical Sensor CharacteristicsAppendix Users Mode Settings Users Modifications Users RecordCamera type