JAI CV-A33CL operation manual Appendix, Precautions, Typical Sensor Characteristics

Page 25

CV-A33CL

10. Appendix

10.1. Precautions

Personnel not trained in dealing with similar electronic devices should not service this camera. The camera contains components sensitive to electrostatic discharge. The handling of these devices should follow the requirements of electrostatic sensitive components.

Do not attempt to disassemble this camera. Do not expose this camera to rain or moisture.

Do not face this camera towards the sun, extreme bright light or light reflecting objects. When this camera is not in use, put the supplied lens cap on the lens mount.

Handle this camera with the maximum care.

Operate this camera only from the type of power source indicated on the camera.

Power off the camera during any modification such as changes of jumper and switch setting.

10.2. Typical Sensor Characteristics

The following effects may be observed on the video monitor screen. They do not indicate any fault of the camera, but do associate with typical sensor characteristics.

V. Aliasing

When the CCD camera captures stripes, straight lines or similar sharp patterns, jagged image on the monitor may appear.

Blemishes

Some pixel defects can occur, but this does not have en effect on the practical operation.

Patterned Noise

When the sensor captures a dark object at high temperature or is used for long time integration, fixed pattern noise may appear on the video monitor screen.

- 24 -

Image 25
Contents CV-A33CL CV-A33CL General Main FeaturesStandard Composition Locations Locations and FunctionsDigital Output Connector for Camera Link Pin Multi-connector DC-IN/TriggerPin Assignment EEN output Input and Output CircuitsCV-A33 Camera Camera Link Cable Camera Link interfaceBasic functions Functions and OperationsCmos Sensor Pixel principleColumn Process Cmos Sensor principle diagramCV-A33 Cmos Sensor array Auto Trigger Window of Interest Window of InterestEffective image format Sensor layout and timingVertical timing Normal mode. Full frame Horizontal timing Normal mode. Full frameLval a-synchronous accumulation Lval a-synchronous accumulationWindow of interest Timing for window of interestInput of Timing Signals Input/Output of Timing SignalsOutput of Timing Signals Trigger ModesContinuous Operation Non triggered Edge Pre-select ModeVertical timing for edge pre-select min. exposure Vertical timing for pulse width control min. exposure Pulse Width Control ModeVertical timing for auto trigger function Auto trigger ModeSwitch setting inside Configuring the CameraOther Functions RS-232C control Parameter Remarks CV-A33CL command listWindow from camera control tool Camera Control Tool for CV-A33Specifications External Appearance and DimensionsSpectral sensitivity CV-A33CL Specification tableTypical Sensor Characteristics PrecautionsAppendix Users Record Users Mode Settings Users ModificationsCamera type