zInstallation and storage sites
The following types of environment can impair performance, lead to damage, pose safety hazards and shorten the useful life of the camera. Select the sites for installing the storing the camera carefully.
ξ Direct sunlight, rain or snow
ξ Flammable or corrosive gasses
ξ Very hot or cold (beyond
ξ Exposed to vibration or shock
ξ Strong electrical or magnetic fields ξ Exceptionally strong light
Continuous operation
In situations where the camera is used continuously for long periods of time, the ambient temperature should be kept below 40 in order to avoid accelerated deterioration of internal parts and to derive maximum
Cleaning
zA photographer’s blower or lens brush can be used for clearing dust from the lens and optical filters.
zWipe dust from the case with a soft dry cloth. If soiling is severe, moisten the cloth with a solution of neutral detergent. Afterwards, wipe the cover with a dry cloth.
zDo not use petroleum distillates, alcohol or spray type cleaners.
Transportation
Remove the lens (install lens mount cap) and carefully in its original or equivalent container. camera from physical shock.
other attachments. Pack the camera Use ample cushioning to protect the
CCD properties
The following phenomena are inherent to a charge coupled device imaging element and do not indicate malfunction.
1)Smear and blooming
Vertical bands are visible when a strong light enters the scene. Adjust the camera aiming direction carefully to avoid strong direct or reflected light.
2)Fixed pattern noise
High ambient temperature can cause fixed pattern noise to appear throughout the scene.
3