Hitachi HV-D30 operation manual Masking

The allowable setting range is -128 to 127.

Pressing the R button increases a numeric value to make the R video signal black level higher. Pressing the L button decreases a numeric value to lower the R video signal black level. For 0 (zero) setting, hold down both the L and R buttons for approx. two seconds.

4) B BLK : B black level setting

The allowable setting range is -128 to 127.

Pressing the R button increases a numeric value to make the B video signal black level higher. Pressing the L button decreases a numeric value to lower the B video signal black level. For 0 (zero) setting, hold down both the L and R buttons for approx. two seconds.

Note: In case of CAM MODE: AUTO, numeric values of R BLK, B BLK become ineffective.



5)Initialize : Returns level menu settings to preset values. Simultaneously press L and R for about 2 seconds.



6) File select : Selects scene files 1 - 4 and preset.



9. MASKING		R		+
Menu for setting the masking.			-		M
1) R HUE:	Change red color phase
		-	+			+
2) Y HUE:	Change yellow color phase				-
		Y
3) G HUE: Change green color phase
					B
4) C HUE:	Change cyan color phase	-
5) B HUE:	Change blue color phase	+		+		-
				-
6) M HUE:	Change magenta color phase	G	+		C
The above items can be set in the range of -128
						

to +127. Respectively press the R button to

increase and the L button to decrease the vector color hue as indicated in the figure. Each item can be set to 0 by simultaneously pressing the L and R buttons for about 2 seconds.

7) R SAT: Increase red color level

23