Hitachi HV-D30 operation manual



[5

FUNCTION select button

Camera setting menu display button.

UP,  LEFT,  DOWN and  RIGHT buttons   Menu screen operating buttons.

 SCENE FILE buttons

Select camera application files and stores scene file data. Four application files can be used as scene files.

Scene files:

To shoot several scenes with different shooting conditions, it is needed to change settings suitable for each scene. To reduce such troublesome operations, various shooting conditions can be memorized previously to scene files, and the conditions most suitable for a scene can be read and set. The RC-Z3 is provided with four files, and four differnt shooting conditions can be memorized.

(1) File selection

 Press the following buttons to change the camera and RC-Z3 settings.

PRESET: Produces the standard setting mode

SCENE FILE 1: FILE-1 (scene file 1) setting mode

SCENE FILE 2: FILE-2 setting mode

SCENE FILE 3: FILE-3 setting mode

SCENE FILE 4: FILE-4 setting mode

Note: The pressed SCENE FILE button lights, then flashes when the application file data are changed. Flashing continues if the data are changed or the original value is returned. When again pressed, the button lights steadily.

(2) Setting data store

The Store function is used to save the application file item data. The common file item data are saved during adjustment and operation.

Store operation

After entering the settings with the menu screen and RC-Z3, press the STORE button (the STORE button flashes). Then press the desired SCENE FILE button for storing the settings (STORE button extinguishes).

Store release

While the STORE button is flashing, again press the button. The STORE button extinguishes and the mode is released.

File data copy

Press the Preset or SCENE FILE button of the source, then press the STORE button (flashes). Next press the SCENE FILE button of the destination file. The settings are copied and stored in the designated file.

Store operation notes:

1.After adjustment and operation with the RC-Z3, neglecting the Store operation before pressing a file button loses the adjustment and setting item data. The output is the designated file data prior to adjustment and operation.

41