Realtime Auto White
The camera detects a white part in the image by itself, and its internal microcomputer automatically adjusts white balance in realtime. Use this function in case that the color temperature varies with time (e.g., from morning to day to night).
1. In the MENU mode, set up WHITE BAL:AUTO.
Where the camera is mounted fixedly and the orientation and
1.In the MENU mode, set up WHITE GATE:ON.
2.Using the WHITE GATE menu in the MENU mode, bring the display window to a monochrome part (white or gray part) in the image.
For details of the WHITE GATE function, refer to p. 22. Be sure to set the WHITE GATE window to a white or gray part in the image. Do not set it to a colored part.
Auto Shading Correction
Color shading may occur in the vertical direction on screen due to any characteristic of lens. This camera is equipped with a function for correcting color shading automatically.
1.Provide a proper aperture value of lens using the auto iris function or manually.
2.Take an white image fully on screen. At this step, take care so that uneven brightness will not occur in the vertical direction.
3.In the DIRECT mode, press the AWB button. White balance is adjusted automatically.
4.In the DIRECT mode, while holding down this button for more than two seconds and press the D button or in the MENU mode, carry out AUTO SHADING. Thus, color shading in the image is corrected automatically.
Notes 1) When using the camera for the first time or after replacing the lens, just be sure above instructions.
2)If adjusted under a light source that has a flicker component, such as fluorescent or mercury, the white balance accuracy can be impaired. Change the electronic shutter mode
36