Hitachi DZMV230A, DZMV200A instruction manual 102

Message		Cause & Troubleshooting	Reference
			page
Cannot move scene in		Move was executed when a program was selected.	72
program mode.
(1) Disc is not format-		DVD-R disc that was not initialized for camera use was
ted. If it formats, it be-		inserted.
comes possible to use
for camera.
(2) However, when you			38
record from PC con-
nection	terminal,
please do not format.
(3) Format the disc
now?
In DVD-R Disc, Video		With DVD-R disc, the movie quality mode once used
mode of the disc re-		for recording cannot be changed.	58
corded once cannot
be changed.
Finalize may not be		Instantaneous shutoff occurred during finalizing, after
complete.	Finalize	which power was supplied and disc was inserted.	89
again now?
Disc error has oc-		Disc error occurred during finalizing, and finalizing failed.
curred. Finalizing is not		Replace the disc.	89
complete.
Scenes over limit. Can-		An attempt was made to move a scene, even though	68, 84
not move scenes.		number of storable scenes was exceeded.
Top scene cannot be		Division is not possible at the start of scene.	83
divided.
End scene cannot be		Division is not possible at the end of scene.	83
divided.
Photo cannot be di-		Still image cannot be divided.	84
vided.
Cannot	combine	Unless consecutive scenes are selected, they cannot	83
scene.		be combined.
Same scenes on Play		This will appear when scenes are to be deleted.	80
List will be deleted.
Delete scenes?
This disc is recorded by		This DVD video camera/recorder can use only discs
the PAL system. Please		recorded on the NTSC system. A disc recorded on the	—
replace disc.		PAL system cannot be used on this DVD video cam-
		era/recorder.
This disc cannot be		A disc that cannot be used on this DVD video cam-	23
used. Please replace		era/recorder has been loaded. Check the type of disc.

English disc.

102