Cautions when connecting DVD video camera/recorder to PC
Do not plug in or unplug any cables when you are using PC to access the disc in the DVD video camera/recorder:
•If you plug in or unplug the PC connection ca- ble or power cable while the CHARGE/ACCESS indicator is blinking, the data on disc may be damaged.
The following cannot be performed on this DVD video camera/recorder when it is connected to PC:
•Camera operation, using button on DVD video camera/recorder.
•Power off, using the power switch.
The mode for connection to PC does not function in the following cases:
•When DVD video camera/recorder is turned off.
•When no disc is in DVD video camera/recorder.
The icon displayed on PC will be CD-ROM in the following cases:
•When a
•When an unformatted
•When a
The mode for connection to PC may not function in the following cases:
•When a
•When DVD video camera/recorder is connected via USB HUB.
•When a USB device other than this DVD video camera/recorder is connected to the same USB bus.
The PC connection cable must be un- plugged and then plugged in again when using the mode for connection to PC in the following cases:
•When the connected PC is set to suspended sta- tus.
The following functions are not supported:
•Writing ordinary file other than AV data.
•Writing and reading to/from the disc in DVD video camera/recorder at the same time.
•Compression of drive or disc utility program.
•Writing to disc, using an application other than that provided in PC kit.
•Formatting disc from PC.
In addition, take note of the following:
•The recording mode, playback status, special effects, or title displayed on this DVD video cam- era/recorder, will not be transferred to PC.
•The volume name of the
•Do not use the DVD video camera/recorder in an environment of high temperatures for an ex- tended period of time.
•Use an unformatted
•When recording data from PC on
English
94