Recording Image from Other AV Devices
You can transfer any image recorded on videotape, etc. to the DVD video camera/recorder via the AV input/output jack, and record it on disc.
Connecting to Other AV Device
Use the AV input/output cable (provided) to connect the DVD video camera/recorder to other AV de- vice as follows:
Output jacks | |
VIDEO | AUDIO |
R | L |
| To video/audio |
| output jacks of VCR |
To AV input/output jack |
|
Yellow Red | White |
AV input/output cable (provided)
Note: If you operate the DVD video camera/re- corder connected to another device, always power the camera/recorder from AC outlet using the AC adapter.
Note: In case of camera recording with this DVD video camera/recorder, do not connect the AV input/output cable to the output jacks of any other device: If you do this, sound from the other de- vice may leak to this DVD video camera/recorder.
Note: If you use a Hitachi VCR, it will be operated by the remote control provided with the DVD video camera/recorder. When recording an image from a Hitachi VCR, change the remote control code of the VCR to other than “VCR2”.
Note: If you increase the volume of speaker in this DVD video camera/recorder when recording an externally input image, noise may occur in the image that is being recorded. To prevent this, re- duce the speaker volume when recording an ex- ternally input image.
English
92