Hitachi DZMV230A, DZMV200A instruction manual Effect Out effect

1 Select the scene for adding special effects and press the MENU button.

The Disc Navigation menu screen will appear.

2 Use the joystick to choose, “Scene”, “Edit”, “Fade”, and then press

the button.

The fade setting screen will appear.

The options will appear under IN and OUT: The mark will be attached to the currently selected option.

3 Use the joystick to select the special effects for “IN” and “OUT”, choose “Enter”, and then press

the button.

After the proceeding message appears, the thumbnail display screen will be restored.

The scenes for which special effects have been set will be attached with marks “”, “”.

“In” effect

“Out” effect

Note: Setting fade will also fade the sound.

Note: Fading can also be set to either “IN” or “OUT”.

Note: Any registered fade can be changed at any time using the same procedure as above. Note: Fade can also be added to on-screen in- formation displayed during playback.

Note: If the playback time of scene is short, fade will cut off midway.

Note: If you set fade-in and fade-out to a still im- age or a movie with recording time of no more than 3 seconds, only fade-in will be valid.

Note: No fade effect will operate if you start play- back in the recording pause status.

Note: If you locate the start of a scene by skip- ping, the image at the start of the scene will ap- pear for a moment, and then fade will operate. Note: The fade effect will not function during frame advance, frame back, slow playback or search playback.

Note: Pressing the button on the screen for veri- fication will restore the thumbnail display screen.

English

82