Hitachi DZMV200A, DZMV230A instruction manual Recording Image from Other Camcorder or AV Device

Recording Image from Other Camcorder or AV Device

1 Set the input selection on the DVD video cam- era/recorder to “LINE”.

Switch the input refer- ring to “Input Selec- tion” on page 59.

2 Turn on the connected device, and start play- back of picture.

The picture will appear on the LCD screen or viewfinder of this DVD video camera/recorder.

3 Press the REC button.

Recording will start on this DVD video camera/ recorder.

The operation of this line-input recording is the same as for recording movie (video).

Note: Still images can also be r ecorded on DVD- RAM disc. See “Changing Method for Recording Stills” on page 60 for details, and “Recording Stills” on page 43 for how to record still images.

Note: The “Input Source” setting will return to “CAMERA” whenever DVD video camera/re- corder is turned off.

Note: Recording of most images is prohibited by the copy-guard signal to protect the copyright, except for images recorded on camcorders for personal enjoyment. These images cannot be re- corded on this DVD video camera/recorder:

Typical copyright protected images include those of DVD video, LD, prerecorded videotape, rental videotape, digital satellite broadcast, etc.

Note: If a video signal that cannot be read by this DVD video camera/recorder is present - even in images recorded on camcorder for personal en- joyment without copy-guard signal - the input im- age may not be recorded normally.

Note: If the input signal is interrupted by switch- ing the channel on TV or switching the signal using video selector, normal recording cannot be per- formed.

English

93