Hitachi DZMV200A, DZMV230A instruction manual CHARGE/ACCESS indicator

Do not turn the DVD video camera/ recorder off while the CHARGE/ACCESS indicator is blinking:

•The CHARGE/ACCESS indicator is blinking to show that data is being written to disc, or being read from it. Do not do any of the following so as not to damage the data:

•Disconnect AC adapter.

•Plug or unplug PC connection cable.

•Remove disc.

•Subject disc to severe vibrations or impact. If the DVD video camera/recorder is turned off while the CHARGE/ACCESS indicator is blink- ing, turn it on again with the disc cartridge or caddy loaded in it: Repair of the disc will be ex- ecuted.

Do not wipe the DVD video camera/ recorder case with benzene or thinner:

•The coating of case could peel off or the case could deteriorate.

•When using chemical cleaning cloth, follow the instructions.

Also read the instructions attached with optional accessories:

•For optional accessories, follow the cautions and instruction manuals attached.

Use the AC adapter only in a well-ventilated, open space:

•Do not use the AC adapter in a narrow space where flow of air is blocked, or where it is very near any object or inside any object: Ignoring this will increase heat inside the AC adapter which could cause fire, burns, electric shock or fault.

CHARGE/ACCESS indicator

Note: The CHARGE/ACCESS indicator will blink in red while the disc is being accessed, and it will blink or light in red during charging.

English

21