Hitachi DZMV200A Inserting and Ejecting Disc, Inserting Disc, How to set one-side recordable disc

Inserting and Ejecting Disc

Inserting Disc

With this DVD video camera/recorder the recorded video and audio are stored on DVD-RAM* or DVD-R disc.

* When using an uninitialized DVD-RAM disc, it must be formatted (see p. 87).

1 Make sure that the DVD video camera/ recorder is turned off.

Set the power switch to “POWER OFF”.

Power switch

2 Press down the DISC EJECT button.

The cover of disc insertion block (hand strap) will slightly open.

DISC EJECT button

3 Gently open the cover by hand until it stops.

4 Insert the disc, in cartridge or caddy, into the disc guide.

Set a both-side recordable disc into the disc guide so that the label of side on which you want to record faces the hand strap.

How to set both-side recordable disc

•The actual recording surface of side [A] is op- posite to that on which “SIDE A” is marked. If you view the image recorded on side [A] on another device, set the disc in it with indica- tion “SIDE A” facing up.

ASide A indica- tion of disc

Laser

Actual recording surface

•The cartridge has a fixed orientation when it is inserted into the DVD video camera/re- corder: Insert it correctly referring to the illus- tration shown below.

To record on side [B], turn the cartridge over.

How to set one-side recordable disc

•Set the disc with the label side up in the caddy, and then insert the caddy correctly referring to the illustration shown below.

The caddy has a mark: Insert it with this mark forward.

English

37