Customizable Buttons Function Options | Hasselblad H4D200MS instruction

CUSTOMIZABLE BUTTONS - FUNCTION OPTIONS

These four grip buttons by de- fault are assigned according to name but can be reassigned (in Custom Options #4, #5, #6 and #7 or by using the Camera Con- figuration tool) to various other functions listed here.

(In addition there are two customizable buttons on the sensor unit: P1 and P2. These are set on the sensor unit or in the Camera Configuration tool in Phocus).

· True Focus

1 True Focus

1	3	2 AE-L

3 M.UP

4 STOP DOWN

· Flash Measure

· Focus Conf.

	Temporarily activates True Focus
	function.
·	AE-lock
	Temporarily locks a light reading
	in auto or manual modes. Also
	used in Zone metering.
·	Mirror up
	Locks mirror up for vibration
	reduced captures. Also lowers
	mirror.
·	Stop down
	Activates stop down function for
	depth-of-field checking.
·	AF
	Temporarily activates Autofocus
	function.
·	Self timer
	Sets self timer mode. Provides
	a timed remote shutter release
	function with the option of a
	change in sequence of the mirror
	movement (to reduce vibration).
·	Bracketing
	Sets Bracketing mode. This func-
	tion provides an automatic series

Activates manual flash measure function.

·Interval timer

Activates interval function start screen.

·Cycle Light Meter mode

Selects next light metering mode.

·Expose

Provides alternative to shutter release button.

·Display Off

Activates Display Off mode im- mediately.

·Histogram

Provides a histogram on the grip display for the last capture.

SHORTCUT ACCESS TO BUTTON SETTING SCREENS

Provides a 100% preview on display for focus checking. Not available for True Focus and AE-L buttons.

·Delete

Direct access to delete dialogue.

·Grey balance exp.

Provides selective capture for grey balance calculations.

·Spirit Level

Activates spirit level on back (but not in viewfinder).

·Rear Info Screen

Activates grip information on sensor unit display.

SAVE

(ISO/WB button)

	of captures; one at the standard
	exposure	setting (Manual or
	Auto) and the others with prede-
	termined deviations in EV from
	the standard exposure.
·	B mode
	Sets B mode shutter setting.
	Shutter stays open as long a
	pressure is maintained on shut-
	ter release button.
·	T mode
	Sets T mode shutter setting.
	Shutter stays open after first
	press of shutter release button
	(toggle function to close again).

1)Press the MENU button fol- lowed by the button you want to reassign (True Focus, AE-L, M.UP or Stop Down).

This directly accesses the par- ticular button you chose at the Custom options level in the menu.

2)Rotate the REAR scroll wheel to select the function you want the button to activate.

3)Press SAVE (or the shutter release button). The selected button will now activate the newly assigned function directly.

Rear scroll

wheel

T i p

See separate section about the Camera Configuration tool.