Hasselblad H4D200MS  DATE & Time,  Display, Sensor Unit Menu Settings User Interface Display

6. Press the True Focus through options.

 DATE & TIME

SENSOR UNIT MENU > SETTINGS > USER INTERFACE > DATE & TIME

The H5D has an internal clock that keeps track of the date and time. This informa- tion is used to mark each shot with the date and time at which it was taken. It is also used to label folders with the date on which each folder was created. (See note under General overview of sensor unit about keeping the internal battery charged to maintain Date and Time settings).

1.Press MENU.

2.Navigate to Settings (use the Rear scroll wheel or the Navigator).

3.Navigate to User Interface (use the Front scroll wheel or the Navigator).

4.Navigate to Date & Time (use the Front scroll wheel or the Navigator).

5.Navigate to required item to select it.

6.	Press the True Focus (	) or AE-L(	) buttons – (or the ZOOM button) – to
	step through options.
7.	Save the chosen selection by pressing EXIT (MENU button).

 DISPLAY

SENSOR UNIT MENU > SETTINGS > USER INTERFACE > DISPLAY

This setting controls the level of Contrast and Brightness (both on a scale of 1-10) on the display. Usually, you should leave this set to the ­default level of 5; however in some viewing environments and/or with some types of images you may wish to increase or ­decrease this value. A value of 10 provides maximum contrast; a value of 0 provides no contrast (a black screen) while a value of 10 provides maximum brightness; a value of 0 provides minimal brightness. Lower brightness values re- quire less battery power.

1.Press MENU.

2.Navigate to Settings (use the Rear scroll wheel or the Navigator).

3.Navigate to User Interface (use the Front scroll wheel or the Navigator).

5.Navigate to Display (use the Front scroll wheel or the Navigator).

or AE-Lbutton (or the ZOOM button) to step

7. Save the chosen selection by pressing EXIT (MENU button).

	Navigator	Display
Menu

Zoom

6 0