Hasselblad H4D200MS user manual Bracketing Setting

Page 69

BRACKETING

options available

options available

options available

2frames or

3frames

or

5 frames

1/3 EV or 1/2 EV or 1 EV or 2 EV or 3 EV

The bracketing function provides an automatic series of cap- tures; one at the standard exposure­ setting (Manual or Auto) and the others with pre-determined deviations in EV from the standard exposure. This is particularly useful for images con- taining a very wide tonal range, for example.

Firstly you make an assessment concerning the number of ex- tra frames required, the order in which they should be taken, and by how much the EV deviation there should be and the setting made accordingly. The first metered exposure (Manu- al or Auto) is the EV that determines the calculations for the bracketing sequence.

Note the difference in operation between Single and Con- tinuous drive settings:

•  At the Single setting you must press the shutter release but- ton separately for every separate ­capture until the sequence is finished.

•  At the Continuous setting you can either maintain the pres- sure on the button to take all frames without stopping or you can release the pressure on the button and press again to ­continue to the end of the sequence without losing any frames within the set sequence.

BRACKETING SETTING

1)Press MENU on grip.

2)Turn the Front scroll wheel until Bracketing appears

3)Press ENTER.

4)Turn the Front scroll wheel to access the options, that are:

Number of Captures (the number of captures required in the se- quence)

Sequence (the sequential order of the over- or underexposures) Step (the amount of EV variation from the standard exposure setting)

(A drop shadow will be displayed beneath the selected symbol, for example )

5)In turn the Rear scroll wheel to choose the number of frames required: 2, 3, 5, 7 or 9.

6)In turn the Rear scroll wheel to choose one of four sequences:

A:  Standard, Over, Under

B:  Standard, Under, Over

C:  Over, Standard, Under

D:  Under, Standard, Over

Front scroll

ON wheel

ENTER

or

SAVE

MENU

Rear scroll

wheel

Number of captures highlighted. 3 cap- tures chosen as op- tion.

A

B

C

D

continued over 

69

Image 69
Contents Page Introduction Page 50MS & 200MS models also feature General overview Controls and displays IndexComputer System Requirements Firmware UpdatesExposure compensation button  Exposure Display button PARTS, COMPONENTS, Buttons and Controls OverviewExample Grip Buttons and ControlsTrue Focus button Camera Body Buttons and ControlsMenu / Exit button Sensor UnitLenses ViewfinderViewfinder Information Display Information − Overview BUTTONS and Scroll Wheels Sensor Unit Display and Controls − Overview GRIP Information  SPIRIT LevelTypical Grip Display Grip Display − OverviewViewfinder Display − Overview ‘aperture priority’ modeSome Examples of Various Viewfinder Displays SecondStop Down Customizable Buttons Function Options CREATING a Profile Camera Configuration in PhocusShortcuts Menu button P1 / P2 setting option accessGeneral  FITTING and Removing a Battery  RECHARGEABLE Battery Grip BATTERY Charger  CARRYING Strap CHARGING the Battery  BATTERY Status  BATTERY Life AUTOMATIC Settings  POWER Modes VIEWFINDER Screen  RE-ACTIVATION from Display OFF or Sleep Modes ACCESSORY Connection  EYEPIECE Adjustment PC-CONNECTOR  REMOVING and Attaching the Viewfinder PROTECTIVE Base Plate  USING Compact Flash Memory Cards INSERTING a CF Card  REMOVING a CF Card FORMATTING Cards  FORMAT Button FORMAT VIA Sensor Unit  SENSOR Unit Introduction  CAREANDMAINTENANCEOFSENSOR Unit REMOVING and Attaching Sensor Unit Do not touch the exposed CCD/filter with your fingers CLEANING the Sensor Filter  CONNECTING to a Computer TETHERED to a Computer with Phocus Running 3FR Jpeg Features in Phocus PhocusPlus Lenses Focus Modes  ATTACHING a Lens  Focusing Distance Calculation REMOVING a Lens  FRONT Lens CAP INFRARED Focus Settings  STOP Down / DEPTH-OF-FIELD Preview FOCUS Assist HCD lenses were formulated for use with the smaller size  MANUAL Override in Autofocus Mode  AUTO / Manual Focus Setting AUTOFOCUS Override in Manual Mode  MANUAL Focus SINGLE Shot  CONTINUOUS TRUE Focus Ca.2.5 m  TRUE Focus and Absolute Position Lock TRUE Focus and Camera Handling  FOCUS Checking in BROWSE, Preview or True Focus ModeMenu Settings Custom Options Menu Settings Custom Options #Four True Focus Methods Activated by Shutter Release Button True Focus RetainedActivated by AN Assigned Button Manual Focus Retained Activated by True Focus Button Autofocus DeactivatedExposure Control  ISO & White Balance  ISO & White Balance on Grip LIGHT Metering Modes  EXPOSURE Setting Modes  SELECTING Metering / Exposure Setting Modes MANUAL Exposure M  AUTOMATIC Exposure A, S, P, PV  OVEREXPOSURE IndicatorMetered area reads ‘Zone 8’  AE- L Button EXPOSURE Compensation / Quick Adjust  FIXED Exposure Compensation SettingNavigating the Menus Basic Description of Sensor Unit Menu Items ISOSound.  OVERVIEW of Navigating Menu and Settings on Sensor Unit OVERVIEW of Navigating Menu and Settings on Grip SavedNot Saved Previews Browsing Standard preview  PREVIEW Modes FULL-SCREEN Mode  FULL Details Mode BROWSING  ZOOMING in and OUTSensor Unit Settings  NAVIGATION Basic Overview of Sensor Unit Menu WHITE Balance Setting on Sensor Unit  ISO Setting on Sensor UnitPresets Sensor Unit Menu ISOImage Format Setting White Balance Setting by Using a ‘GREY CARD’ IMAGE Format Sensor Unit Menu White Balance ManualStorage Settings Storage DELETE  FORMATSettings User Interface  SOUND SettingsSensor Unit Menu Settings User Interface Sound Audio FeedbackSensor Unit Menu Settings User Interface Display Sensor Unit Menu Settings User Interface Date & Time DATE & Time  DISPLAYSensor Unit Menu Settings Custom Options P1 / P2 Settings Custom OptionsP1 and P2 Button Function Options 10 sec, 20 sec, 30sec, 60 sec Sleep SERVICE Settings ServiceSensor Unit Menu Settings Custom Options Image Orientation Sensor Unit Menu Settings Custom Options Show PreviewSettings about Sensor Unit Menu Settings about ABOUT Normal at default setting Repro at default settingUser icon Grip Menu Settings System status Drive  GENERAL Overview of Grip Menu SELF Timer  SETTINGSSelf Timer Setting Bracketing Bracketing SettingExample Interval Setting IntervalSecond 1 hour Custom Options on Grip Settings Custom Options10s 20s 30s 60s  CUSTOM Options on GripStep Delete Grey bal ex Spirit Level Rear Info Screen NoneOn Off No YesHalf press Always Off Ext flash Camera OffExit Stay All controls Wheels OffNone 2s 10s 60s Interval time Normal Light meterMs 100 ms 200 ms None 25 ms Settings Image Info Image Info SettingSettings Date & Time System Status Disclosure Single and Continuous Setting Camera active mode DRIVE Profiles Making a Profile Profiles CHANGING a Profile Name  USING ProfilesFlash / Strobe General Flash / Strobe ACCESS to Controls Using the integral flash INTEGRAL Flash  SEPARATE Flash Unit Connection  FLASH Measure of Separate Flash UnitTo use flash measure Accessories Connectivity Diagram HC Lens Range HVM waist level viewfinder Optional AccessoriesHVM correction lens holder Optional HC Lens AccessoriesMulti Shot Appendix H5D-40 H5D-50 H5D-60 H5D-50MS H5D-200MS H5D Camera SpecificationsAll models General Default Settings ‘DEFAULT’ ProfileTrue Exposure Stopped down one stop with True Exposure mode OFFMode Automatic Exposure P & PV ModePROBLEMS, Equipment Care & Service ServiceEquipment Care 101 Copyright Victor Hasselblad AB All rights reserved 103