EZN850
| SETUP |
|
LENS | DC <┘ | |
SHUTTER | ___ | |
WHITE BAL. | ATW | |
BACKLIGHT | OFF | |
AGC | MIDDLE | |
> DNR |
| LOW |
AUTO <┘ | ||
SPECIAL <┘ |
| |
EXIT |
| |
ÖOFF: No reduction in noise level.
ÖLOW: Little reduction in noise level with nearly no ghost image. Default value is LOW.
ÖMIDDLE: Just enough reduction in noise levels without causing much ghost imaging.
ÖHIGH: Huge reduction in noise level, which may cause much ghost imaging.
Note:
When AGC is turned off, DNR will be disabled.
4.4.2.7 SENS-UP
SENS UP is used to keep a brilliant, vivid screen image by automatically detecting changes in the level of light under low light level conditions. The value is from x2 ~x128.
1.Please direct the arrow to point to “SENS UP” on the SETUP menu by clicking UP (c) or DOWN (d) key.
2.Select the mode you would like to operate by clicking LEFT (e) or RIGHT (f) key.
ÖAUTO: Low light level auto mode. Default value is AUTO (Up to X 10).
| SETUP |
|
|
|
LENS | DC <┘ |
| LIMIT | |
SHUTTER | ___ | > AUTO | X 10 | |
WHITE BAL. | ATW | |||
BACKLIGHT | OFF |
|
| |
AGC | MIDDLE |
|
| |
DNR |
| LOW |
|
|
> | <┘ | AUTO <┘ |
|
|
SPECIAL |
|
|
| |
EXIT |
|
|
| |
ÖOFF: The function is disabled.
29