EverFocus EZN850 user manual

Page 42

EZN850

To change the priority of events, click on the event and it will be highlighted. Press

or button to move between events. The event that has

highest priority will be activated first.

Press Apply to apply the setting changes or Reset to reset without saving the change.

This example describes how to set the camera to upload images to FTP when someone press Manual trigger button:

1.Click button in Event page.

2.Enter an event name for the event, e.g. Event 1

3.Select “Manual Trigger” as event type.

4.Select “Upload to FTP” as action type.

42

Image 42

Contents EZN850 User’s Manual EZN850 Safety Notice EZN850 About this documentTerms and Trademark SupportTable of Contents Introduction Accessing the Camera Menu EZN850 Setting EZN850 System Info InformationEZN850 2 Log User Config EZN850 Network NetworkSubnet Mask IP TypeIP address GatewayEZN850 Password Http PortDdns Bandwidth SMTP/FTP EZN850 EZN850 Network Alarm reserved for PowerCon VideoEZN850 Multi Streaming Camera Lens ControlOSD setting LensShutter ESC Reserved White Balance ControlBacklight AGC Auto Gain Control DNR Dynamic Noise ReductionSENS-UP Special M E R a I D C D E F G H L M P Q R S T U V W X Y Z Motion Detection AREA1 AREA2 AREA3 AREA4 EZN850 Color ADJ Aerea SEL AREA1 Sync INT Area State OFF EZN850 Special Camera ID OFF Color ADJ Sync INT Motiion DET Privacy Exit User Event EZN850 Event EZN850 Motion Alarm EZN850 EZN850 Time Mask System Date/TimeEZN850 EZN850 Daylight Saving SD Card EZN850 EZN850 EZN850 Serial Communication Maintenance EZN850 Specifications Environmental China Office Head OfficeUSA L.A. Office USA N.Y. Office Europe Office Japan Office